AC Charging Stations (Piles) for Home Use
Shell Material:Galvanized steel body, Tempered glass panel
Dimension:180 x 80 x 240 mm
Installation Methods:Wall-mount Column installation
Indicator Light:Blue, green, purple and red
Input Voltage:EU 220V / US 110V
Input Frequency:EU 50Hz / US 60Hz
Output Voltage:EU 220V / US 110V
Standby Power Consumption:6W
Working Temperature:-30℃ ~ +55℃
Working Humidity:5% ~ 95% without condensation
Cooling Method:Natural cooling
Over voltage protection; Under voltage protection; Overload protection;
Short circuit protection;Earth leakage protection;
Grounding protection; Over temperature protection; Low temperature protection;
The car can be fully charged in 7 hours on average and it can last for 45km for average charging per hour.
◆Smart Swipe Charging:
Plug and play charging, swiping card charging, a variety of start-up methods are adjustable
Note: it will stop automatically when fully charged
It works normally even on rainy days and can be applied to a variety of scenes.
◆Two types of chargers:
EU Standard 220V /US Standard US 110V
Please select the right chager according to your car model before purchasing
◆LED Indicator Light:Blue, green, purple and red
◆28FT CABLE LENGTH:
This cable features strong and durable, which length is perfectly suitable for all kinds of parking lots(garages), especially for home use.
◆SUITABLE FOR ALL MODELS:
Our products are suitable for all EV Charging Electric Vehicles
1.Positioning holes according to the size of the wall-mounted backplane, then punching holes of 4-φ6*35mm and inserting expansion tubes.
2.Lock the 4-M4*32 self-tapping screws into the expansion tube, and
fix the wall-mounted backboard on the wall.
3.Open the upper cover of the charging pile, hang the pile on the wall-mounted backboard, and lock the screws from the bottom of the
4.Pass the power cable of 3*6mm through the corresponding waterproof head and connect it to the corresponding input terminal.
Lock the screws of the upper cover panel.
1.For the first installation, attention on should be paid to the power cable according to IN-L (fire), IN-N (zero), PE (ground) one by one, and the fire wire and zero wire cannot be reversed.
2.PE (ground wire) needs to be grounded reliably.
3.Make sure the emergency stop switch is activated after power on.
4.Before charging, make sure that the tip of the EV charger is free
from stains and water;
5.It is prohibited to place the charging pile inside the car when charging.