Coolant Vacuum Refill Kit Time-saving Vacuum Coolant Refill Kit Well-sealed Cooling System Vacuum Purge & Refill Kit with Pressure Gauge

Coolant Vacuum Refill Kit, 5x Adapters, Universal Cooling System Refiller Kit, Radiator Coolant Refill Tool Kit, Automotive Coolant Pressure Test Gauge Vacuum Filler Tool

Used to remove air in the cooling system and refill coolant while monitoring the real-time pressure, ensuring no air pocket left and no leakage during the whole process

Comes with 5 adapters including 1x tapered one (O.D. ranging 0.55”-1.8”) and 4x adapters (O.D.: 1.38”, 1.54”, 1.73”, 2.17”), plus the 3-way T connector included, making it widely applicable to a variety of models

Pressure gauge marked with 2 units (bar & cmHg) and equipped with a protective rubber cover, impact-proof and anti-fall

Designed with 5ft hose, transparent to easily see the coolant flow, equipped with a brass connector and a fine filter

Comes with a rugged ABS case to keep all tools well stored and organized, no chance to lose on the busy fields

• 【Time-saving Coolant Refill Kit】Coolant vacuum refill kit is used for coolant vacuum filling and vacuum pressure testing.Using this tool to replace coolant can avoid poor coolant circulation caused by air entering the radiator. It needs to be used with a air compressor(not included).By creating a vacuum in the cooling system and drawing coolant into radiator, it greatly shorten the time for coolant replacement, no need for time-consuming air discharge, and reduce the risk of engine overheating.
• 【Widely Fit for Most Types of Vehicles】Coolant vacuum refill kit is equipped with 4 adapters of different sizes (OD 1.38inch, 1.57inch, 1.77inch, 2.17inch) and a universal rubber tapered plug adapter(OD range: 0.55-1.8inch), widely suitable for water tank of all kinds of vehicles, like cars, SUVs, vans and trucks. The adapter sleeve can be installed on the manifold body to seal the cooling system to help fill the coolant. Note: Please check if your radiator opening size matches the adapters.
• 【Well-sealed & Accurate Measuring & Durable Coolant Vacuum Refill Kit】Tee fitting, manifold body, and control valve of the cooling system vacuum purge & refill kit are made of high-quality aluminum and brass, which is corrosion resistant, high hardness and good sealing, avoiding air leakage. The pressure gauge(Range:-1~0 Bar/-76~0 cmHg) is covered with rubber, shockproof and anti-drop. Its stable pointer provide you with accurate pressure measurement. Water tank leaks can be quickly detected.
• 【Tee Fitting for Vacuumizing & 60-inch Long Coolant Filling Hose】 Cooling system vacuum purge & refill kit is equipped with a brass tee fitting with American air plug, which can be connected to vacuum pump for vacuumizing. The coolant filling hose is 60-inch long, which can be inserted into the manifold to refill the coolant. The rubber coolant filling hose is transparent and easy to observe. Its suction nozzele with filter net can isolate impurities.
• 【Easy-carry & Well-organized Toolbox】Coolant vacuum refill kit comes with a blow-molded plastic toolbox with inlay storage, which can be transported conveniently and quickly, and is safer to store and easier to organize. Note: Do not replace the coolant while it is hot, please wear goggles and gloves during operation. Be careful when opening the cooling system. The cooling system may spray hot coolant under pressure.

SPECIFICATION

-Pressure: -1~0Bar, -76~0cmHg

-O.D. of Adapter: 1.38”, 1.54”, 1.73”, 2.17”

-O.D. of Tapered Adatper: 0.55”-1.8”

-Length of Hose: 5ft

-Case Size: 12.2x8.8x2.5in

PACKAGE

-1 x Coolant Vacuum Refill Tool with Gauge

-1 x 5ft See-through Hose

-1 x Universal Tapered Adapter

-4 x Adapter of Different Sizes

-1 x 3-way T-connector with Air Plug

-1 x Storage Case