Read VAG MQB ELV and TCM Sync Data Through the Dashboard
The MQB Collector gathers ELV and TCM authentication data through the instrument cluster connector, and the data is uploaded for server calculation of the ELV immobilizer data, so the ELV module does not have to be removed.
- VAG MQB
- ELV / TCM Sync Data
- Cluster Connector
- 32-Byte Code
Key Features
-
Collects Through the Cluster Connector
Connects at the dashboard connector to read ELV and TCM authentication data.
-
No ELV Removal
Sync data is collected without taking the ELV module out of the vehicle.
-
Server-Calculated Immobilizer Data
Collected data is uploaded and the server calculates the 32-byte ELV immobilizer code used in MQB key programming.
-
Part of the RH850/V850 Workflow
Intended to be used alongside the OBDSTAR RH850/V850 kit on VAG MQB vehicles.
What's in the Box
- OBDSTAR MQB Collector
Good to Know
Caution
- Requires an OBDSTAR X300 Classic G3; the collector does not work on its own.
- If the ECM or TCM is a used or non-original module that was never programmed online at a dealer, the 32-byte sync code may not be calculated.



































![ef6d61ae6946f7c1809f4497.jpg [EU Ship] OBDSTAR MQB Collector for RH850/V850 Kit to Read VAG ELV/TCM Sync Data](https://autoboss.com/wp-content/uploads/obdstar-catalog/media/ef6d61ae6946f7c1809f4497-transparent-100x100.png)