Bench and Boot Reading of Bosch and Continental ECUs
The P003+ adapter and ECU bench cables let a compatible OBDSTAR tablet read Bosch ECU data, CS and PIN codes on the bench or in boot mode, covering Audi, Citroen, DS, Mahindra, Peugeot, Skoda, SEAT, VW and other makes. Check the supported ECU list before ordering.
- Bench & Boot Mode
- EEPROM / Flash Read
- CS / PIN / MAC
- TCM Read/Write
Key Features
-
Continental PCR2.1
Reads CS, PIN code and MAC value on VAG 1.6L diesel applications.
-
Bosch MED17.4.4, EDC17C60 and MD1CS018
Reads EEPROM and PIN code on PSA, Opel/Vauxhall and Mahindra BS-6 applications.
-
Bosch MED17xx / EDC17xx
Reads EEPROM, flash, CS, PIN code and MAC value on VW, Skoda, Audi, SEAT, Bentley, Lamborghini, Porsche and other ECUs.
-
Bosch ME17xx
Reads and writes EEPROM and flash.
-
Transmission Controllers
Reads and writes T87A and 6HP TCM EEPROM and flash.
Highlights

Kit Parts
Diagnostic cable, ECU bench cable with pin and boot connectors, adapter, boot jumpers and 12 V power lead.

Connection Order
Diagnostic cable, adapter and ECU bench cable join in one line.
What’s in the Box
- 1รP003+ adapter
- 1รECU bench cable set
How to Use
- Join the cablesConnect the diagnostic cable’s OBD connector, the P003+ adapter and the ECU bench cable.
- Wire the ECUConnect the ECU pin connector according to the wiring diagram.
- Boot mode onlyConnect the ECU boot connector with the spring-needle or soldered boot jumper to the ECU.
- Power upConnect 12 V power to the diagnostic device.
- Read dataRead the data on the diagnostic device.
Good to Know
Caution
- Works only with the compatible hosts listed in the specifications; the DC706 uses a different P003+ kit.




































![dd4acb8cc49f14de089f7b43.jpg [US Ship] OBDSTAR P003+ Adapter with ECU Bench Cables for OBDSTAR X300 DP PLUS/ Key Master DP/ X300 PRO4/ D800/ MS80](https://autoboss.com/wp-content/uploads/obdstar-catalog/media/dd4acb8cc49f14de089f7b43-transparent-100x100.png)