Read Engine, Transmission, ABS and SRS Codes and Run Common Service Resets
The MaxiDiag MD806 reads and clears codes and shows live data on four core systems, performs common service resets and runs the full set of OBD2 tests from a 4-inch handheld.
- 4 Systems
- 7 Service Resets
- All 10 OBD2 Modes
- Report Printing via PC
- Rubber Boot Housing
Key Features
-
Four-System Diagnostics
Read and clear codes and view live sensor data on ABS, SRS (airbag), engine and transmission, to trace misfires, faulty injectors, transmission oil temperature or why the check engine, ABS or airbag light is on.
-
Service Resets
Oil reset, EPB reset, SAS reset, DPF regeneration including forced regeneration, battery registration, throttle relearn and air-fuel ratio reset; also resets service intervals and turns off the ECU brake warning light.
-
OBD2 Tests
Read and clear codes, live data, smog check (I/M readiness), freeze frame, O2 monitor test, on-board monitor test, component test, module present and vehicle information, with enhanced mode 6 support.
-
Diagnostic Reports
Print diagnostic reports through a PC connection for further review and analysis.
-
Global OBD II Coverage
U.S. domestic, Asian and European makes and models, with all OBD II protocols.
More Specifications
| Memory | 32MB, 166 MHz |
|---|---|
| Power consumption | 1.7 W |
| Operating temperature | -10ยฐC to 60ยฐC (14ยฐF to 140ยฐF) |
| Storage temperature | -20ยฐC to 70ยฐC (-4ยฐF to 158ยฐF) |
| Operating humidity | 5%โ95% non-condensing |
| Housing | Plastic housing with protective rubber boot |
What’s in the Box
- 1รMaxiDiag MD806 main unit
- 1รMain cable
- 1รCarry case
- 1รQuick reference guide
- 1รMicro SD card
- 1รUSB cable
Good to Know
Caution
- The MD806 does not work on vehicles after 2015.
- Service resets do not work on all cars; check your vehicle and the functions you need before ordering.
English 
German 
Spanish 