A 30 L Walnut Blaster That Collects Media and Carbon as It Cleans
The WD616 cleans supported intake-system areas and intake-valve carbon with air-driven walnut media while built-in suction and filtration recover media and residue. It is not a full-engine cleaner; you supply the compressor and new walnut media, and match one of five adapters to the port.
- 30 L Body
- 5 adapterformaten
- 1000 W
- 110 V / 220 V versies
Key Features
-
Stralen met geรฏntegreerde terugwinning
Compressed air drives the walnut abrasive while the suction and filter path collects media and carbon.
-
Vijf inlaatadapters
Choose the profile that fits and seals the exact engine port before blasting.
-
Groot terugwinvolume
The 30 L stainless drum holds abrasive and recovered material for workshop handling.
-
Kort doorspoelen tegen verstopping
About 10 seconds of air before and after operation helps keep the feed path clear.
Modelvergelijking
| WD616 | WD716 | WD816 | |
|---|---|---|---|
| Adapters | 5 | 23 | 23 |
| Capaciteit | 30 L | 10 L | 10 L |
| Power | 1000 W | 1000 W (110 V) / 1400 W (220 V) | 1000 W (110 V) / 1400 W (220 V) |
Inhoud van de doos
- WD616 main unit in the selected voltage
- Vijf maten inlaatadapters
- Blasting gun
- Recovery hose
How to Use
- Controleer voertuig, lucht en voedingCheck the target, the adapter, the compressor requirement and the 110 V or 220 V unit.
- Pistool en slang aansluitenSecure the gun, nozzle and suction path.
- Plaats de adapter en dicht afMatch the port, close the target intake valve and isolate other openings.
- Load new mediaAdd at least 2 kg of new, unopened walnut media approved for the WD616.
- Met lucht doorspoelen, stralen en terugwinnenRun the short air purge, clean one supported port and keep recovery running.
- Final checkRemove visible media, inspect, reassemble and complete leak, diagnostic and function checks.
Compressor setup, safety and maintenance: WD616-gebruikershandleiding (PDF)
Good to Know
Let op
- External compressed air is required. Get the exact pressure and dynamic flow requirement before ordering.
- The current manual calls for brand-new, unopened walnut media; do not plan on routine reuse of recovered media.
- Close the target valve, seal the adapter and isolate other paths. Wear goggles, gloves and respiratory protection and ventilate the area.
- Follow the WD616 manual and vehicle specifications; the machine is intended for trained users.
Onderhoud
- Confirm the nameplate and grounding of the 110 V or 220 V unit before connecting.
- Recover and inspect before startup, and dispose of used media according to the manual and local rules.
English 
Deutsch 
Espaรฑol 
Nederlands 
Franรงais 