Sluit een BMW 20-pins diagnosepoort aan op een 16-pins diagnosetester
This short passive cable links a matching BMW 20-pin diagnostic socket to a compatible 16-pin OBD2 tool. It only routes the existing signals; scan, coding and programming functions still depend on the vehicle and the connected tool.
- BMW 20-Pin naar 16-Pin
- Kabel van 40 cm
- Volledig koperen kern
- Nylon kabel van 7.00 mm
- Passieve adapter
Belangrijkste kenmerken
-
Directe poortaanpassing
Routes a matching BMW 20-pin interface to a 16-pin OBD2 connector without protocol conversion.
-
Volledig koperen geleiders
All-copper wire supports stable data transmission during the diagnostic connection.
-
Dikkere kabel
The cable body is thicker than the 5.00 mm ordinary OBD cable shown in AUTOOL’s comparison, and at 190 g it is heavier than that cable’s 160 g.
-
Beschermende nylon buitenkant
The nylon body is built for daily workshop handling and is described as waterproof, heat-resistant, flexible, anti-scalding and anti-aging.
Inhoud van de doos
- AUTOOL BMW-adapterkabel van 20-polig naar 16-polig OBD2
- AUTOOL-verpakkingstas
Gebruiksaanwijzing
- Bevestig de voertuigaansluitingCheck the diagnostic port shape and pin layout; identify the connector and year, and inspect it for damage.
- Controleer de toolcombinatieVerify the scanner, software, protocol, module, task and any authorization independently of the cable.
- Sluit veilig aanLijn de aansluitingen correct uit en forceer nooit een stekker die niet past.
- Zonder trekspanning leggenKeep the cable away from pedals, sharp edges, heat, moving parts and pinched trim.
- Communicatie controlerenRun a read-only connection check first; if communication changes, compare with a direct connection.
Goed om te weten
Let op
- A compatible 16-pin diagnostic scanner is required and sold separately; its vehicle and module coverage must match the BMW system you need.
- Do not attach unknown or high-current devices to vehicle diagnostic power; follow the vehicle and tool current limits.
- If the tool drops connection, overheats, resets or changes vehicle behavior, stop and return to a known direct connection.
Onderhoud
- Keep the cable and connectors clear of pedals, steering, seat tracks, doors and driving controls.
English 
Deutsch 
Español 
Nederlands 
Français 