Main Test Cable for the FXTUL M7 Motorcycle Scanner
The main test cable connects the FXTUL M7 to a motorcycle's diagnostic socket or to a brand-specific connector. It is designed for the M7 only.
- Voor FXTUL M7
- Kabel met drie uiteinden
- DC-voedingsaansluiting
- Vervangingsonderdeel
Key Features
-
Drie aansluitpunten
A D-sub plug with thumb screws for the scanner end, a red OBD-style connector for the vehicle side, and a round DC power socket on a short lead.
-
Veilige scanneraansluiting
Thumb screws on the D-sub plug let the cable be fastened so it does not work loose during a test.
-
Voedingsingang voor speciale aansluitingen
Some special diagnostic sockets do not supply power; in that case the M7 manual calls for power from the battery clamp, which the DC socket is typically used for.
Inhoud van de doos
- FXTUL-hoofdtestkabel voor M7
How to Use
- Inspecteer de kabelCheck the cable and all three connectors for damage before use.
- Sluit de scanner aanPlug the D-sub end into the M7 and tighten the thumb screws.
- Sluit de motorfiets aanAttach the OBD-style end to the motorcycle's socket or to the connector that matches the brand and socket style.
- Voeg voeding toe indien nodigIf the socket does not power the M7, supply power through the battery clamp as described in the M7 manual.
Volledige menuhandleiding: FXTUL M7-gebruikershandleiding (PDF)
Good to Know
Let op
- Fits the FXTUL M7 only. Only the cable is included; the scanner, brand connectors and battery clamp are not part of this item.
- Do not use the cable if the insulation or any connector is damaged.
Onderhoud
- Do not twist or sharply bend the cable; keep it away from heat, oil, sharp edges and moving parts.
- Gebruik de band om de kabel opgerold op te bergen.
English 
Deutsch 
Espaรฑol 
Nederlands 
Franรงais 