Recover, Recycle, Flush and Recharge R134a From One Guided Station
The LM806 runs a configured R134a sequence — recovery, recycling, evacuation and recharge — once the technician confirms the refrigerant and enters verified values, and adds line flushing and printed service records. R134a only; there is no built-in refrigerant identifier.
- R134a Only
- Terugwinning >350 g/min
- Koudemiddel bijvullen >800 g/min
- 4 elektronische weegschalen
- Line Flushing
Key Features
-
Koudemiddelverwerking in vier fasen
Separates used oil, filters and dries recovered refrigerant, manages non-condensable gas and stores the processed R134a in the working tank.
-
Afzonderlijke vloeistofweegschalen
The working tank, PAG oil, POE oil and used oil are weighed at their own positions; the stated accuracies are scale specifications, not whole-machine accuracy.
-
PAG- en POE-oliecircuits
Two new-oil positions plus used-oil measurement support vehicle-specific oil handling, including compatible hybrid and EV work.
-
Leidingen spoelen zonder demontage
Circulates R134a through permitted A/C lines; remove, bypass or replace excluded components as the OEM procedure requires.
-
Voertuiggegevens en servicerecords
The editable database gives a starting point for charge values; enter VIN and job details and print the operation record.
-
Drukcontrole
High- and low-side pressures are shown for connection checks and post-service review.
-
Onderhoudbaar ontwerp
Rear service access for maintenance; filter and vacuum-pump oil service are prompted by the machine.
Meer specificaties
| Koudemiddelidentificatie | Not built in; identify and isolate refrigerant before connecting |
|---|---|
| Leak check | Alleen vacuümhoudtest; lokaliseert geen lek |
| Power supply | Regional version; confirm the unit nameplate (do not assume both 110 V and 220 V) |
Modelvergelijking
| LM707 | LM708 | LM806 | |
|---|---|---|---|
| Refrigerant | R-134a | HFO-1234yf / R-134a | R-134a |
| Display | 5-inch display | 7-inch touchscreen | 10.1-inch touchscreen |
| Languages | 6 | 4 | 5 |
| Elektronische weegschalen | 1 | 5 | 4 |
| Oil adding | Manual | Automatic | Automatic |
| Leidingen spoelen | No | No | Ja |
| Afdrukken, database, gebruiksregistraties | No | Ja | Ja |
Inhoud van de doos
- 1×LM806-hoofdeenheid
- 1×Hose set: 3 m red and blue high/low-pressure hoses plus 1.5 m yellow hose
- 1×R134a-hogedruk-/lagedrukkoppelset
- 1×Regionale voedingskabel
- 1×User manual
How to Use
- Bevestig R134a en het toepassingsbereikIdentify the refrigerant, isolate contamination and get the vehicle charge, oil and permitted-flushing procedure.
- Inspecteer het stationKeep the unit level, check scales, containers, tank and hoses, and use grounded power matching the nameplate.
- De koppelingen aansluitenClean the service ports, secure the high/low couplers and keep hoses away from hot or moving parts.
- Controleer de voertuiggegevensUse the database as a starting point, then confirm refrigerant mass, oil type and quantity from the vehicle or OEM source.
- Win de olie terug en houd de hoeveelheid bijRecover R134a into the working tank and record the oil removed.
- Vacumeer en houd vastEvacuate after recovery; stop and diagnose the connection or system if the vacuum-hold check fails.
- Spoelen, olie toevoegen en koudemiddel bijvullenFlush only permitted lines, then add the measured OEM-specified oil and R134a charge.
- Controleer en koppel losReview pressures and cooling, print the record and close the couplers before disconnecting.
Instellen, olieverwerking, spoelen en probleemoplossing: LM806-gebruikershandleiding (PDF).
Good to Know
Let op
- Never connect the LM806 to R1234yf, mixed, unidentified or any other refrigerant, and never route contaminated refrigerant into the working tank.
- Never fill the tank beyond 80% of its effective capacity.
- Use grounded power matching the nameplate, avoid extension cords and disconnect power before maintenance.
- Do not use compressed air in the refrigerant circuit for leak testing.
- Wear eye protection and rubber gloves, and provide mechanical ventilation of at least four air changes per hour.
- On hybrid and electric vehicles, follow the exact OEM oil requirement and every high-voltage safety step.
Onderhoud
- At first setup, remove the transport restraints, keep the scales unobstructed and zero only an empty tank.
- Vervang het droogfilter wanneer de levensduurmelding verschijnt.
- Replace vacuum-pump oil after 600 operating minutes, or sooner if it is visibly degraded.
- Stay with the machine during the cycle and verify the final result; only qualified personnel should operate it.
English 
Deutsch 
Español 
Nederlands 
Français 