Verbind een GM-diagnoseaansluiting met 12 pinnen met een diagnosetester met 16 pinnen
This short passive cable links a matching GM 12-pin vehicle socket to a compatible 16-pin OBD2 tool. It only routes the existing signals; diagnostic functions and protocol support still come from the vehicle and the scan tool.
- GM 12-pins naar 16-pins
- Kabel van 41 cm
- Koperen kern
- Gevlochten nylon mantel
- Passieve adapter
Belangrijkste kenmerken
-
Korte verlenging
The 41 cm length reduces direct pulling on the vehicle diagnostic port while keeping the setup compact.
-
Koperen geleiders
Copper wire carries the data between the vehicle port and the diagnostic equipment.
-
Bescherming met gevlochten nylon
The reinforced nylon outer layer adds flexibility and wear resistance for daily use.
-
Licht en compact
At about 125 g, the cable fits easily in a toolbox or diagnostic kit, and the connector body is shaped for quick plug-in.
-
Alleen pinroutering
De adapter voegt geen scanfuncties toe en zet geen protocollen om.
Inhoud van de doos
- AUTOOL GM-adapterkabel van 12-polig naar 16-polig OBD2
- Beschermende verpakking
Gebruiksaanwijzing
- Bevestig de voertuigaansluitingCheck that the vehicle has a compatible GM 12-pin socket; identify the connector, year and pinout, and inspect it for damage.
- Controleer de toolcombinatieVerify the scanner, software, protocol, module, task and any authorization independently of the cable.
- Sluit veilig aanLijn de aansluitingen correct uit en forceer nooit een stekker die niet past.
- Zonder trekspanning leggenKeep the cable away from pedals, sharp edges, heat, moving parts and pinched trim.
- Communicatie controlerenRun a read-only connection check first; if communication changes, compare with a direct connection.
Goed om te weten
Let op
- A compatible 16-pin diagnostic scanner and its software are required and sold separately.
- Do not attach unknown or high-current devices to vehicle diagnostic power; follow the vehicle and tool current limits.
- If the tool drops connection, overheats, resets or changes vehicle behavior, stop and return to a known direct connection.
Onderhoud
- Keep the cable relaxed during testing and avoid sharp bends at the vehicle port.
- Keep the cable away from hot engine parts, belts, fans and sharp metal edges.
FAQ
Kan deze kabel zelfstandig een module programmeren?
No. It contains no diagnostic or programming electronics. Programming depends on a compatible interface, software, authorization, a regulated power setup and the vehicle-specific procedure.
Wat moet ik controleren vóór het bestellen?
The exact vehicle connector and pinout, model year, scanner hardware, software version, and the module and task you need.
Kan ik het tijdens het rijden aangesloten laten?
Only when the complete installation is approved for that use and cannot interfere with pedals, steering, trim, seat movement or vehicle networks. For workshop tasks, disconnect it after testing.
English 
Deutsch 
Español 
Nederlands 
Français 