Compare Up to Five Spark Plugs Side by Side on the Bench
The SPT360 fires one known-good reference plug and up to four removed test plugs at the same simulated speed, so differences in spark continuity are easy to see through the transparent cover. It compares spark behavior in air, not under cylinder pressure or load.
- Referentiebougies: 1 + testbougies: 4
- 200–9000 rpm-instelling
- Digitaal display met achtergrondverlichting
- In hoogte verstelbare bougiehouders
- 110 V / 220 V ingang
Key Features
-
Vergelijking met een referentie
Put a standard plug in the reference socket and the plugs under test in the other four for a clearer judgment.
-
Instelbaar gesimuleerd toerental
Set the firing rate with the RPM + and − buttons and read it on the backlit LCD. The setting is a bench firing rate, not real engine speed.
-
Ondersteuning voor lange bougies
Adjustable socket height accepts longer automotive and motorcycle spark plugs.
-
Ontsteking in een gesloten behuizing
The transparent protective cover keeps high-voltage sparks enclosed while all five positions stay visible.
Modelvergelijking
| SPT101 | SPT301 | SPT360 | |
|---|---|---|---|
| Test holes | 2 | 3 | 5 |
| Gesimuleerde snelheid | 0–6000 rpm | 200–9000 rpm | 200–9000 rpm |
| LCD-scherm met achtergrondverlichting | No | Ja | Ja |
| Instelbare hoogte / lange bougies | No | Ja | Ja |
How to Use
- Steek de stekkers inPut the standard plug in the reference hole and the plugs to be tested in the remaining holes.
- Connect powerPlug the power adapter into the side port and confirm the indicator light turns on.
- Sluit het dekselClose the transparent protective cover before testing.
- Start en pas aanTurn on the power switch and set the working frequency with the RPM + and − buttons.
- VergelijkenCompare firing continuity and consistency at the same setting; higher settings raise the firing rate.
Bedienings- en veiligheidsdetails: SPT360-gebruikershandleiding (PDF)
Good to Know
Let op
- Plug voltage can reach tens of thousands of volts during operation. Never run the tester with the cover open and do not touch the plugs.
- Turn the power off before inserting or removing spark plugs.
- Results show spark behavior in air; confirm any suspected fault with the applicable vehicle procedure.
Onderhoud
- Use and store the tester in a dry, ventilated place.
- Check and tighten loose parts regularly, and replace aging wires or worn parts during maintenance.
English 
Deutsch 
Español 
Nederlands 
Français 