Read Codes on All Systems and Run Common Service Resets From One Handheld
The MaxiDiag MD806 Pro reads and clears codes and shows live data on all available systems, runs the full set of OBDII tests, and performs oil, battery, EPB, SAS, DPF, SRS, throttle and A/F service functions on a limited range of makes and years.
- Foutcodes & livegegevens van alle systemen
- 10 OBDII-testmodi
- 7 servicefuncties
- Auto VIN
- PC-rapporten printen
Key Features
-
Onderhoudsfuncties
Oil service reset, battery registration and reset, parking brake pad relearn after replacement, steering angle sensor relearn and diesel particulate filter regeneration, plus SRS, throttle and A/F adjustment.
-
Volledige OBDII-tests
Freeze frame data, I/M readiness, O2 monitor test, on-board monitor test, component test, vehicle information (CIN and CVN), modules present and DTC lookup.
-
Codes lezen en wissen, MIL resetten
See why warning lights are on, decide whether to fix the fault yourself or go to a mechanic, then clear occasional codes and reset the lights.
-
Auto VIN
Retrieves the Vehicle Identification Number automatically for efficient diagnosis.
-
Data Review
Play back recorded data, and print diagnostic reports through a Windows-based PC.
Meer specificaties
| Geheugen | 32MB, 166 MHz |
|---|---|
| Energieverbruik | 1.7 W |
| Bedrijfstemperatuur | -10ยฐC tot 60ยฐC (14ยฐF tot 140ยฐF) |
| Opslagtemperatuur | -20โ tot 70โ (-4โ tot 158โ) |
| Bedrijfsluchtvochtigheid | 5%โ95% niet-condenserend |
| Housing | Strong plastic housing with protective rubber boot |
Inhoud van de doos
- 1รMD806 Pro-hoofdeenheid
- 1รOBD II cable
- 1รUSB-kabel
- 1รMicro SD card
- 1รUser manual
- 1รQuick guide
- 1รCarry case






































