Heated Ultrasonic Cleaning for Small Parts on the Bench
The CT80 uses ultrasonic cavitation in a compact stainless steel bath to lift dirt, grease, carbon deposits and residue from immersed surfaces, gaps and small features, with heat and a timer you set for each part and liquid. It cleans injectors as parts but does not test them.
- 1.6 L Tank
- 40 kHz / 60 W
- Heating Up to 50°C
- 0–40 Minute Timer
- Reinigingsstandaard inbegrepen
Key Features
-
Cavitation Cleaning
Ultrasound forms tiny bubbles in the cleaning liquid; their collapse produces local cleaning action around immersed surfaces and small features.
-
Optional Heating
Warm the liquid when both the part and the liquid allow it; heat supports cleaning but does not replace the right liquid.
-
Instelbare cyclustijd
Set the duration to the part’s condition instead of using one fixed cycle for everything.
-
Roestvaststalen tank
Resists corrosion and heat with compatible liquids within the rated temperature range.
-
Handgrepen en stabiele voeten
Stainless steel handles for lifting and anti-slip rubber feet to keep the unit steady while running.
Modelvergelijking
| CT80 | CT83 | CT85 | |
|---|---|---|---|
| Tank capacity | 1600 mL | 3 L | 10 L |
| Cleaning time | 0–40 min | 1–40 min | 1–40 min |
| Verwarming | Up to 50°C | 10–60°C | 10–60°C |
| Modi | Normaal | Normaal / ontgassen / frequentiesweep | Normaal / ontgassen / frequentiesweep |
| Part support | Cleaning stand | Reinigingsmand | Reinigingsmand |
Inhoud van de doos
- CT80-ultrasoonreiniger
- Tank lid
- Cleaning stand
- Power cable for the ordered power version
How to Use
- Load the tankPlace the item in the tank or on the cleaning stand without forcing it against the tank walls.
- Add cleaning liquidFill with a liquid suited to the tank, the item and the residue before starting.
- Connect powerPlug in and turn on the power switch on the side of the machine.
- Stel de tijd in en startSet the cleaning time and press ON/OFF; press the heating button only when the item and liquid can be heated.
- Inspect the itemAfter the cycle, rinse, dry or test the item as it requires; verify injector performance on an injector test bench.
Good to Know
Let op
- Never run ultrasonic cleaning with an empty tank.
- Choose the 110 V or 220 V version to match your local power before ordering.
- Tank capacity is not the maximum usable part size; check the part’s actual dimensions with room for the stand and liquid.
- Clean a circuit board only when it is unpowered and suitable for liquid ultrasonic cleaning, and dry it completely afterward.
- The CT80 does not test spray pattern, leakage, flow or pressure on injectors.
Onderhoud
- Check delicate finishes, jewelry, seals, coatings and adhesives before immersion.
English 
Deutsch 
Español 
Nederlands 
Français 