Self-Contained Smoke Leak Testing You Can Carry Between Bays
The SDT50 runs from a 12 V vehicle battery and has its own air pump, so no shop air is needed. Smoke starts in about five seconds for visual tracing of permitted low-pressure leaks in intake, exhaust, fuel-tank, crankcase, seal, fitting and coolant-tank paths.
- Ingebouwde luchtpomp
- Rook in ongeveer 5 s
- 1.5 kg hoofdeenheid
- <10 psi uitgang
- 12 V DC Power
Key Features
-
Geen externe luchttoevoer
The built-in pump supplies the test airflow, keeping setup simple wherever the vehicle is.
-
Snelle rookstart
Smoke generation starts in about 5 seconds, and a connected test line fills with smoke in about 30 seconds.
-
Breed scala aan lekcontroles
Crankcase, oil seals, intercooler air, throttle valve, intake manifold, exhaust, fuel tank, line fittings and coolant tank.
-
Licht en draagbaar
The compact main unit takes little storage space and is easy to carry for mobile diagnostics.
-
Bescherming tegen hoge en lage temperaturen
Automatic power-off at 75 °C, with operation supported down to -20 °C.
-
Gegroepeerde bediening
Filling port, smoke indicator switch, hook port, power socket and smoke outlet sit together on the unit for quick setup.
Meer specificaties
| Werkingsprincipe | Verbranding bij laag zuurstofgehalte |
|---|---|
| Output mode | Alleen rookmodus |
| Manometer / debietmeter | Geen |
Modelvergelijking
| SDT50 | SDT60 | SDT100 | |
|---|---|---|---|
| Air source | Built-in pump | Built-in pump | Built-in pump |
| Rated output | <10 psi, <5 L/min | <10 psi, <5 L/min | <10 psi, <5 L/min |
| manometer | No | Ja | No |
| Storingsindicator | No | No | Ja |
| Net weight | 1.5 kg | 1.6 kg | 1.6 kg |
| Main unit size | 145 × 80 × 200 mm | 145 × 80 × 200 mm | 180 × 102 × 143 mm |
Inhoud van de doos
- AUTOOL SDT50-rooklektester
- Voedingskabel met accuklemmen voor 12 V
- Rookuitvoerslang
- Trechter en vulfles
- Hanging hook
- User manual
How to Use
- Voeg testolie toeFill 10–15 mL of baby oil or liquid paraffin before first use; do not exceed this range.
- Sluit de testleiding aanDisconnect the line you want to test and connect it to the smoke hose, with the detector near the test area.
- InschakelenConnect to a 12 V DC battery, confirm the hose and test line are secure, then turn on the power switch.
- Locate leaksOnce the line fills with smoke, look for escaping smoke; use a headlamp if needed.
- Repareer en test opnieuwConfirm the escape path against the system layout, repair the leak and repeat the same test.
Installatie, veiligheid en storingsdiagnose: SDT50-gebruikershandleiding (PDF)
Good to Know
Let op
- Testing oil is not included; use liquid paraffin or baby oil.
- Do not run the unit continuously for more than 8 minutes. After an overheat shut-off, let it cool before restarting.
- The round metal housing gets hot during use; avoid touching it.
- Never refill testing oil while the unit is running.
- Do not introduce smoke into any system the vehicle or component service procedure excludes from smoke testing.
- The SDT50 does not measure pressure or airflow.
Onderhoud
- Replace the testing oil regularly and drain old oil before adding fresh oil.
- Top up only when the smoke becomes thin, adding no more than 15 mL at a time.
English 
Deutsch 
Español 
Nederlands 
Français 