Activate, Read, Relearn and Program TPMS Sensors From One Handheld
The MaxiTPMS TS508WF activates all known OE sensors, reads sensor status, checks TPMS system health, programs Autel MX-Sensors and performs relearns, with software updates over Wi-Fi or USB.
- Activeren / uitlezen / opnieuw inleren
- MX-Sensor-programmering
- Snelle en geavanceerde modi
- Wi-Fi Updates
- Signaaltest van sleutelafstandsbediening
Key Features
-
TPMS-statusscherm
Read sensor IDs stored in the ECU, check that sensor and ECU IDs match, read and erase DTCs, and view DTC descriptions.
-
Sensorgegevens in één oogopslag
Displays sensor ID, pressure in psi and, on supported sensors, battery life.
-
Begeleide inleerprocedures
Shows vehicle-specific relearn procedures and performs OBDII relearns.
-
Twee opties voor MX-Sensor-programmering
Copy by OBD writes the ID saved in the ECU; Auto Create makes new IDs when the original cannot be obtained.
-
Bandentype en bandenspanning selecteren
When all TPMS faults are cleared and the tires are at placard pressure but the TPMS light stays on, select the tire type and set the correct pressure value; placard reset works on supported vehicles.
-
Updaten zonder computer
Update the software directly over Wi-Fi, or by USB.
Meer specificaties
| Battery type | Li-polymer |
|---|---|
| Bedrijfstemperatuur | 0°C tot 50°C (32°F tot 122°F) |
| Opslagtemperatuur | -20℃ tot 70℃ (-4℉ tot 158℉) |
Inhoud van de doos
- 1×MaxiTPMS TS508WF
- 1×OBD II cable
- 1×USB-kabel
- 1×AC adapter
- 1×Packing list
- 1×Carrying case
Good to Know
Let op
- Sensor programming works with Autel MX-Sensors only.
English 
Deutsch 
Español 
Nederlands 
Français 