High-Output Dry Ice Cleaning With Adjustable Ice Feed
The HTS818 feeds dry ice pellets from a 7.5 kg hopper at a continuously adjustable 0 to 3.2 kg/min, with spiral stirring and air filtration to limit clumping and feed interruptions. It runs on an external compressor delivering more than 1–3 m³/min, which is not included.
- 0–3.2 kg/min Ice Feed
- 7.5 kg Hopper
- Spiral Stirring & Air Filtration
- Mobile Metal Body
Hauptmerkmale
-
Adjustable Dry Ice Feed
Set pellet delivery with the ice output knob to suit each tested cleaning task.
-
Spiral Feed and Air Filtration
The stirring mechanism and built-in filter help reduce clumping, internal icing and interrupted output.
-
Single-Gauge Pressure Monitoring
The control panel shows incoming air pressure while you verify the full air setup.
-
Automotive Cleaning Areas
Engine-bay, throttle-body and component surfaces after checking material and access. Intake-valve or combustion-chamber work requires a vehicle procedure that permits dry ice.
-
Mobile Metal Body
Metal housing, push handle, 360° casters and gun storage for moving between bays.
-
No Solid Media Residue
Pellets sublimate after impact; the carbon, oil and debris removed from the part still need cleanup.
HTS818 vs HTS828
| HTS818 | HTS828 | |
|---|---|---|
| Pressure gauge | Single | Dual |
| Compressed-air flow | >1–3 m³/min | >1–2 m³/min |
| Hopper / ice feed | 7.5 kg / 0–3.2 kg/min | 7.5 kg / 0–3.2 kg/min |
What’s in the Box
- HTS818 dry ice blasting machine
- Blasting hose and gun handle
- Spray nozzles and scraper
- Air inlet hose with valve
- Clamp cables and ground strap
- Ice scoop and spare fuses
- Gloves, safety goggles and earplugs
- Bedienungsanleitung
Anwendung
- Confirm the setupCheck external air flow and pressure, grounded power, fresh pellets and ventilation.
- Inspect and dry the air pathCheck hoses, gun, filtration and controls; purge moisture before loading.
- Load dry iceAdd fresh pellets without foreign material and close the hopper.
- Test the targetStart with conservative pressure and feed on a small suitable area and confirm the result.
- Clean and monitorWatch pressure and pellet delivery while collecting loosened contamination.
- Clear and shut downSet feed to zero, clear remaining pellets per the manual, disconnect air and power, and inspect wear parts.
Loading, feed adjustment, maintenance and troubleshooting: HTS818 user manual (PDF)
Good to Know
Caution
- The air compressor and dry ice are not included. Verify the compressor’s actual flow at working pressure, dry air, and suitable hose and fittings.
- Confirm the 110 V or 220 V version, plug and nameplate before connection.
- Dry ice releases CO₂ and is cold and loud: ventilate the area and wear gloves, goggles, hearing protection, protective clothing and closed-toe shoes.
Care
- Confirm access, material, coating and procedure for every task; cleaning without disassembly or damage is not universal.
- Plan containment and cleanup for removed debris.
English 
German 
Spanish 