Hauptmerkmale

1. Layered Safety

   Two synchronized hydraulic systems, hydraulic locks and triple mechanical safety devices, with automatic unlocking during descent and a 24 V safety control circuit.

2. Expandable Guide Ramps

   The ramps fit a wider range of long-wheelbase vehicles and double as extension plates for added support.

3. Alloy-Steel X-Frame

   Laser-cut premium alloy steel for strength and resistance to corrosion and deformation, finished by shot blasting and high-temperature powder coating.

4. Machined Hydraulic Cylinders

   Cylinders are turned on automatic CNC lathes and the barrels are roller-burnished for concentricity, sealing and surface quality.

5. Hydraulic Components

   Japanese or Italian seals, Italian ball valves and a hose burst protection device.

6. Bearings at Every Pivot

   Wear-resistant bearings at all pivot points reduce friction.

Anwendung

1. Qualify the siteBefore installation, confirm the lift drawing, concrete strength and thickness, anchors, clearances, power, air and approach space.
2. Inspect before useCheck anchors, platforms, hoses, cylinders, locks and synchronization parts before loading a vehicle.
3. Position the vehicleCenter it on the platforms and keep doors, tires and bodywork clear of moving parts.
4. Set the pickup pointsUse the manufacturer’s approved lift points and match platform and extension placement to the wheelbase.
5. Raise and checkLift just enough to take the load, verify contact points and balance, then continue while watching both sides.
6. Engage the locksLower onto the mechanical locks and confirm both sides are engaged before anyone goes underneath.
7. Clear and lowerRemove tools and people, release the locks as designed and lower under control.

Good to Know