Battery Power Lead for FXTUL Scanners on Ports Without Power
A 1.8 m alligator-clip lead that powers an FXTUL motorcycle diagnostic tool from the battery when the bike’s diagnostic port supplies no power. Order the version that matches your tool.
- 1.8 m Lead
- 12V / 3A
- 5521 Plug
- M3 / M4 / M6 / M7
Hauptmerkmale
-
For Ports That Supply No Power
Use it on motorcycles whose diagnostic interface has no power output, on ports where the power output has failed, and on bikes with only a 2-pin diagnostic interface.
-
Red and Black Clips
Separate red and black alligator clips take power straight from the battery terminals.
-
Versions for Each Tool
Offered for the M3-A, M3-B, M3-C, M4-EU, M4-Asia, M4-HD, M4-DUC, M4-BMW, M7 and M6.
How to Choose and Fit
- Choose your versionSelect the version named after your FXTUL tool when ordering.
- Connect the diagnostic cablePlug the tool into the bike’s diagnostic port with the cable for that brand.
- Clip on to the batteryAttach the red clip to the positive terminal and the black clip to the negative terminal.
- Plug in the power leadInsert the 5521 plug into the tool’s power socket, then start the diagnosis.
Most diagnostic ports power the tool on their own; the clamp lead is only needed on special interfaces that do not.
Good to Know
Caution
- Rated for 12V and up to 3A. Do not connect it to a higher-voltage supply.
- The tool must have a 5521 power socket. Check your tool before ordering.
Care
- Before each use, check the lead, clips and plug for damage, and do not use a damaged lead.
English 
German 
Spanish 