AUTOOL OD750 100 L Pneumatic Oil Extractor and Drainer with 12 L Sight Cup

Extract or Drain Used Oil, Measure It, Then Store It in One Mobile Tank

The OD750 recovers used engine oil by probe extraction or with a height-adjustable catch pan, lets you inspect and measure it in a transparent pre-chamber, and collects it in a large mobile tank for controlled discharge. Requires a compressed-air supply.

100 L Main Tank
12 L Transparent Pre-Chamber
20 L Catch Pan
Long + Short Probes
Vacuum + Gravity Recovery

Key Features

Three Oil Paths

Probe extraction, gravity collection through the catch pan, and controlled discharge from the storage tank, each as a separate procedure.
See the Oil Before Transfer

Observe and measure extracted oil in the transparent pre-chamber before moving it to the main tank.
Height-Adjustable Catch Pan

Collects gravity-drained oil beneath a raised vehicle.
Long and Short Probes

Different probe lengths suit compatible dipstick-tube and service-port extraction routes.
Fewer Tank Transfers

The high-capacity storage tank reduces how often you need to empty the unit.
Mobile Bay Design

Wheels, swivel casters, a handle and probe storage keep the station movable and organized.

What’s in the Box

OD750 pneumatic oil extractor and drainer
Height-adjustable catch pan
Long and short extraction probes
Extraction and controlled-discharge hose set
User manual

AUTOOL OD750 tank with extraction probes, catch pan, push handle, transparent pre-chamber, tools and user manual — OD750 and included components.

How to Use

Prepare the air supplyConnect clean compressed air and inspect the regulator, hoses, valves and tank level.
Choose the recovery routeFit a compatible probe for suction, or position the catch pan for gravity draining.
Build and isolate vacuumCreate vacuum as directed, isolate the air supply, connect the probe and watch oil entering the pre-chamber.
Transfer to the main tankClose the extraction path and move the collected oil from the pre-chamber or pan into the tank.
Discharge the tankUse the separate low-pressure discharge procedure into an approved waste container, then release tank pressure.

Air settings, operation and troubleshooting: OD750 user manual (PDF).

Good to Know

Caution

Do not use with gasoline, diesel, brake fluid, methanol- or ketone-containing liquids, or other flammable fluids.
Waste oil is hot; protect against hot fluid and surfaces.
Vent the tank through the instructed procedure before service, storage or opening a connection.
Compressed-air input, extraction vacuum and tank discharge are separate operating conditions; use the specified setting for each.