Read Codes on All Systems and Run Common Service Resets From One Handheld
The MaxiDiag MD806 Pro reads and clears codes and shows live data on all available systems, runs the full set of OBDII tests, and performs oil, battery, EPB, SAS, DPF, SRS, throttle and A/F service functions on a limited range of makes and years.
- All-System Codes & Live Data
- 10 OBDII Test Modes
- 7 Service Functions
- Auto VIN
- PC Report Printing
Hauptmerkmale
-
Service Functions
Oil service reset, battery registration and reset, parking brake pad relearn after replacement, steering angle sensor relearn and diesel particulate filter regeneration, plus SRS, throttle and A/F adjustment.
-
Full OBDII Testing
Freeze frame data, I/M readiness, O2 monitor test, on-board monitor test, component test, vehicle information (CIN and CVN), modules present and DTC lookup.
-
Read and Clear Codes, Reset the MIL
See why warning lights are on, decide whether to fix the fault yourself or go to a mechanic, then clear occasional codes and reset the lights.
-
Auto VIN
Retrieves the Vehicle Identification Number automatically for efficient diagnosis.
-
Data Review
Play back recorded data, and print diagnostic reports through a Windows-based PC.
More Specifications
| Memory | 32MB, 166 MHz |
|---|---|
| Power consumption | 1.7 W |
| Operating temperature | -10°C to 60°C (14°F to 140°F) |
| Storage temperature | -20°C to 70°C (-4°F to 158°F) |
| Operating humidity | 5%–95% non-condensing |
| Housing | Strong plastic housing with protective rubber boot |
What’s in the Box
- 1×MD806 Pro main unit
- 1×OBD II cable
- 1×USB cable
- 1×Micro SD card
- 1×Bedienungsanleitung
- 1×Quick guide
- 1×Carry case
English 
German 
Spanish 