Soldered Chip Connection for the OBDSTAR P001 Programmer
The W001 data cable links the P001 programmer to a chip through a bonding wire so the chip’s data can be read or written. It is the same W001 cable supplied in the standard P001 configuration.
- P001 Accessory
- Bonding-Wire Connection
- Chip Data Read/Write
Hauptmerkmale
-
Bonding-Wire Read and Write
Wires are soldered from the cable to the chip, giving the P001 a direct connection for reading or writing its data.
-
Wiring Shown on the Tablet
During a job, the OBDSTAR tablet displays the wiring diagram for the connection.
-
One of Three P001 Data Cables
The P001 set also uses W002, which clamps SOP 8-pin chips without soldering, and W003, which connects with clips and probes. W001 is the soldered option.
What’s in the Box
- 1×OBDSTAR W001 data cable
Good to Know
Caution
- This is a cable only. The OBDSTAR P001 programmer and a compatible OBDSTAR tablet are required and sold separately.
English 
German 
Spanish 