Replacement Parts for MRCARTOOL S310 and S311 Home EV Chargers
Service parts for the S310 and S311 wall-mounted chargers: a replacement main board, a single RFID card, or a 314-inch custom charging cable. Choose the charger model and the part from the options.
- S310 / S311
- Main Board
- RFID Card (1 pc)
- 314-inch Charging Cable
Key Features
-
RFID Card
Both the S310 and the S311 can start a charge with a card swipe. Order a spare, or replace a lost card.
-
Main Board
A replacement control board for a charger that no longer works because of a board fault.
-
Custom Charging Cable
A 314-inch charging cable made for these chargers.
How to Choose and Fit
- Identify the chargerThe S310 has no display or app control and is rated 110V/220V. The S311 is a 220V unit with a display and Smart Life app control. Both are 32A, 7KW wall units with an SAE J1772 connector.
- Select the partChoose the charger model and the part in the options.
- Isolate the supplyBefore fitting a main board or cable, switch off the charger’s circuit at the breaker.
- Fit the partHave a qualified electrician fit internal parts and cables.
- TestRestore power and confirm a card swipe starts charging.
Good to Know
Caution
- Main board and cable replacement involves mains voltage. Isolate the supply first and have a qualified electrician do the work.
- Parts are listed for the MRCARTOOL S310 and S311 only. Check your charger model before ordering.
English 
German 
Spanish 