All-System Codes and Live Data Plus Common Service Resets in a Handheld Scanner
The MaxiDiag MD808 Pro reads and clears codes and shows live data on all available systems, runs all 10 OBDII test modes, and adds service functions such as oil reset, battery registration, EPB, SAS and DPF regeneration. Service functions are limited to specific makes and model years.
- All-System Codes & Live Data
- 10 OBDII Test Modes
- 7 Service Functions
- Auto VIN
- 4.0-Inch Display
Key Features
-
Service Functions
Oil service reset, battery registration and reset, parking brake pad relearn after replacement, steering angle sensor reset, DPF service including forced regeneration, throttle and A/F adjustment, and service interval reset.
-
Complete OBDII Testing
Read and erase codes, live data, freeze frame, I/M readiness, O2 monitor, on-board monitor and component tests, vehicle information (CIN and CVN), modules present and DTC lookup, with enhanced Mode 6 support.
-
Read Codes, Reset MIL
Find out why warning lights are on, clear occasional fault codes, turn off the MIL and the ECU brake warning light.
-
Auto VIN
Retrieves the vehicle identification number for faster vehicle setup.
-
Data Playback and Printing
Review recorded data on the tool and print diagnostic reports through a Windows-based PC.
More Specifications
| Memory | 32MB, 166 MHz |
|---|---|
| Operating temperature | -10°C to 60°C (14°F to 140°F) |
| Storage temperature | -20°C to 70°C (-4°F to 158°F) |
| Operating humidity | 5%–95% non-condensing |
| Housing | Strong plastic housing with protective rubber boot |
What’s in the Box
- 1×MD808 Pro main unit
- 1×OBD II cable
- 1×USB cable
- 1×Micro SD card
- 1×User manual
- 1×Quick guide
- 1×Carry case
English 
German 
Spanish 