Portable EV Charging with Selectable Current and Delayed Start
The C350 is a Mode 2 in-cable charger for EVs with the European 7-pin AC inlet (IEC 62196-2). Choose a current the outlet and circuit can carry, follow the session on the display and delay the start for off-peak hours. Order the plug and voltage version that match your region.
- 8–16 A in 5 Steps
- 3.3 kW Rated
- 5 m Cable
- IP65 Control Box
- Delay up to 8 h
Hauptmerkmale
-
Session Display
Shows charging voltage, current, energy, time, temperature and status, with Power, State, FLT1 and FLT2 indicators.
-
Five Current Settings
Select 8, 10, 12, 14 or 16 A to suit the socket, circuit capacity and vehicle; the default is 14 A.
-
Delayed Charging
Set the start time in 30-minute steps up to 480 minutes (8 hours) to charge in an off-peak window.
-
Fire-Resistant Connector
The vehicle connector uses high-strength fire-resistant material with leakage and flame-retardant protection.
-
Thick Copper Cable
Oxygen-free pure copper conductors carry a steady 16 A, inside a wear-, rain- and dust-resistant outer layer.
-
13 Listed Protections
Leakage, overvoltage, undervoltage, short circuit, waterproof, emergency stop, lightning, overtemperature, moisture, reverse connection, grounding, overcurrent and flame-retardant protection.
-
Carry and Store
A storage bag keeps the charger together in the trunk.
More Specifications
| Housing material | High-strength ABS and PC |
|---|---|
| Certification marks | MD, LVD, FCC, CE, RoHS |
| FLT1 indicator | Overcurrent, leakage, self-test failure, overvoltage, undervoltage or overtemperature protection |
| FLT2 indicator | Self-test failure, communication fault, missing ground wire or leakage current |
What’s in the Box
- C350 control unit with attached charging cable and vehicle connector
- Power plug for the ordered regional version
- Storage bag
- Bedienungsanleitung
Anwendung
- Check the charging chainConfirm the plug and connector version, then inspect the outlet, circuit, grounding, cable, control box, connector and vehicle inlet for damage, heat, moisture or debris.
- Connect the supplyPlug into a compliant AC outlet rated for the current you plan to use and confirm normal power status.
- Connect the vehicleSeat the vehicle connector fully and check the connection status on the display.
- Set current or delayUse SET / OK to select a current the outlet, circuit and vehicle allow, or schedule the start.
- Monitor and disconnectStop if a fault, unusual heat, damage or an unstable connection appears; switch off the power, then unplug by the connector handle.
If charging does not start, check that the socket is powered, the plug is secure, the vehicle connector is fully inserted, the vehicle inlet is clean and undamaged, and whether a fault indicator is lit. Manual: C350 user manual (PDF).
Good to Know
Caution
- Use a correctly rated, grounded outlet and wiring for continuous EV charging at the selected current. Do not use non-compliant sockets.
- Confirm the vehicle inlet, plug type and 110 V or 220 V version before ordering.
Care
- Avoid sharp bends, pulling or strain on the cable while charging.
- Check the connector and vehicle inlet for foreign objects before each use.
English 
German 
Spanish 