Main Test Cable for the FXTUL M7 Motorcycle Scanner
The main test cable connects the FXTUL M7 to a motorcycle's diagnostic socket or to a brand-specific connector. It is designed for the M7 only.
- For FXTUL M7
- Three-Ended Cable
- DC Power Socket
- Replacement Part
Hauptmerkmale
-
Three Connection Points
A D-sub plug with thumb screws for the scanner end, a red OBD-style connector for the vehicle side, and a round DC power socket on a short lead.
-
Secure Scanner Connection
Thumb screws on the D-sub plug let the cable be fastened so it does not work loose during a test.
-
Power Input for Special Sockets
Some special diagnostic sockets do not supply power; in that case the M7 manual calls for power from the battery clamp, which the DC socket is typically used for.
What's in the Box
- FXTUL main test cable for M7
Anwendung
- Inspect the cableCheck the cable and all three connectors for damage before use.
- Connect the scannerPlug the D-sub end into the M7 and tighten the thumb screws.
- Connect the bikeAttach the OBD-style end to the motorcycle's socket or to the connector that matches the brand and socket style.
- Add power if neededIf the socket does not power the M7, supply power through the battery clamp as described in the M7 manual.
Full menu walkthrough: FXTUL M7 user manual (PDF)
Good to Know
Caution
- Fits the FXTUL M7 only. Only the cable is included; the scanner, brand connectors and battery clamp are not part of this item.
- Do not use the cable if the insulation or any connector is damaged.
Care
- Do not twist or sharply bend the cable; keep it away from heat, oil, sharp edges and moving parts.
- Use the strap to coil the cable for storage.
English 
German 
Spanish 