Replacement Bluetooth VCI for the MUCAR 892BT
The vehicle communication interface that plugs into the OBD-II port and links the car to the MUCAR 892BT tablet without a cable.
- MUCAR 892BT
- Bluetooth 5.0
- Magnetic Mount
- CAN FD Support
Key Features
-
Stores on the Tablet
The dongle attaches magnetically to the back of the 892BT, keeping the unit slim and easy to hold.
-
Wireless Link
An external VCI that talks to the tablet over Bluetooth 5.0 once it is plugged into the vehicle.
-
Broad Protocol Support
Handles SAE J1850 PWM and VPW, ISO 9141-2, ISO 14230-4 KWP, ISO 15765-4 CAN and CAN FD.
More Specifications
| Working voltage | 9–18V |
|---|---|
| Working current | ≤130mA |
| Operating temperature | 0–50°C (32–122°F) |
| Storage temperature | -20–60°C (-4–140°F) |
Good to Know
Caution
- This connector is for the standard 892BT. Fitting it does not add the topology mapping or J2534 pass-thru capability of the 892BT PRO; MUCAR states a standard unit cannot be converted to the PRO by replacing the VCI.
Care
- Switch the ignition on before testing; the engine does not need to run.
- If the VCI shows no power, check that it is fully seated in the port and the ignition is on.
English 
German 
Spanish 