Two Short OBD2 Extensions for Recessed Ports and Tight Footwells
Each passive cable extends a standard OBD2 16-pin port to a scanner or ELM327-style adapter without cutting vehicle wiring. It adds reach only; diagnostic functions come from the connected tool.
- 30 cm Each
- 16-Pin Male to Female
- Two Cables
- No Wire Cutting
Key Features
-
Male-to-Female Connection
Plug the male end into the vehicle port and the female end into a compatible scanner or adapter.
-
Flexible Cable Body
The soft TPE jacket routes easily around the driver footwell or dashboard area.
-
Copper-Core Conductors
Copper-core wiring supports stable diagnostic communication.
-
Plug-In Installation
Extends the original OBD2 port without cutting, modifying or affecting the vehicle circuit.
What’s in the Box
- 2×OBD2 extension cable, 16-pin male to 16-pin female
How to Use
- Confirm the vehicle portIdentify the connector and pinout and inspect it for damage.
- Confirm the tool chainVerify the scanner, software and protocol support independently of the cable.
- Connect safelyAlign the connectors correctly and never force a mismatched plug.
- Route without strainKeep the cable away from pedals, sharp edges, heat and moving parts.
- Verify communicationRun a read-only connection check first; if communication changes, compare with a direct connection.
Good to Know
Caution
- Not intended for non-OBD2 or proprietary diagnostic connectors.
- Do not attach unknown or high-current devices to vehicle diagnostic power.
Care
- Do not pull the cable by force or bend it sharply near the connector housing.
- Keep both ends firmly connected, and keep the cable clear of pedals, steering, seat tracks and doors.
English 
German 
Spanish 