Connect a 16-Pin Scan Tool to a BMW 20-Pin Socket
This braided, copper-core adapter routes a BMW 20-pin diagnostic socket to a compatible 16-pin OBD2 tool. It is passive: protocol and diagnostic coverage still depend on the vehicle and scan tool.
- BMW 20-Pin → 16-Pin
- 40 cm Braided Cable
- Copper Core
- Passive Adapter
Hauptmerkmale
-
Nylon Braided Sleeve
Reduces wear from bending, pulling and daily workshop handling.
-
Flexible Insulated Jacket
A flexible, insulated, non-toxic outer layer that is easier to route around the vehicle.
-
Pure Copper Conductors
Copper-core wiring carries the diagnostic signals between socket and tool.
-
Built for Frequent Plugging
The connectors are designed for repeated diagnostic use.
-
Pin Routing Only
Adds no scan functions and no protocol conversion; it cannot diagnose a vehicle by itself.
What’s in the Box
- 1×BMW 20-pin to 16-pin OBD2 adapter cable
- 1×Protective packing bag
Good to Know
Caution
- A compatible 16-pin diagnostic tool is required; scanner, software and licenses are not included.
- Not every BMW has a 20-pin diagnostic socket; check your vehicle connector before ordering.
- Do not attach unknown or high-current devices to vehicle diagnostic power.
Care
- Check pin type and connector direction before connecting, and never force a mismatched plug.
- Pull by the connector body, not the cable, and keep the pins clean and dry.
- Route the cable clear of pedals, steering, seat tracks and doors.
English 
German 
Spanish 