AUTOOL OD720 70 L Pneumatic Oil Extractor and Drainer with 10 L Measuring Cup

Extract Through a Probe or Catch From Below, Then Check the Oil

The AUTOOL OD720 recovers used engine oil by air-driven vacuum through extraction wands or by gravity into a height-adjustable catch pan. Extracted oil passes through a glass measuring cup for a quantity and condition check before it goes into the storage tank. Requires a compressed-air supply.

Vacuum + Gravity Recovery
70 L Storage Tank
10 L Glass Measuring Cup
20 L Catch Pan
5 Extraction Wands

Hauptmerkmale

Air-Powered Vacuum Extraction

Compressed air drives a vacuum generator that draws oil through the selected wand and hose into the measuring cup or tank.
Tempered Glass Measuring Cup

Clear, heat- and corrosion-resistant, with scale marks for judging oil quantity and quality.
Thickened Storage Tank

Thickened tank material helps reduce oil and air leakage during recovery.
Large, Adjustable Catch Pan

A wide pan on a lifting rod collects drain-plug oil, with height set to suit the lift and vehicle.
Wands for Different Inlets

Corrosion-resistant evacuation wands in different diameters for different oil inlets.
Mobile, With Level in View

Locking swivel casters and a handle for positioning, an oil-level sight window and a tool tray for small tools.

More Specifications

Body dimensions	570 × 500 × 1307 mm
Casters	360° swivel, with locks

What’s in the Box

OD720 storage tank assembly with drain hose and tank valves
Tempered glass measuring cup assembly with hose
Oil catch pan and height-adjustable lifting rod
Evacuation wand set and wand holder
Swivel caster set with brakes
Handle and tool tray parts
Small tools
Bedienungsanleitung

AUTOOL OD720 package: storage tank, lifting rod, evacuation wands, measuring cup assembly, tools, handle, tool tray, casters, catch pan and user manual — OD720 components as supplied for assembly.

Anwendung

AssembleTurn the measuring cup assembly clockwise onto its seat on the tank, fix the lifting rod and pan funnel, and keep the rod vertical.
Extract through the cupClose the cup valve and hose valve, fit the right wand, connect air to the vacuum generator and set the gauge to the rated negative pressure; insert the wand and open the hose valve.
Empty the cupWhen oil reaches the warning line, open the cup valve to drain it into the tank.
Or catch from belowRaise the vehicle, align the pan funnel with the drain hole and remove the drain plug.
Discharge the tankClose the cup, discharge-pipe and tank inlet valves, connect air to the tank inlet and pressurize; after about 5 seconds open the drain valve slowly, then cut off the air.

Full procedures and troubleshooting: OD720 user manual (PDF).

Good to Know

Caution

Do not use with brake fluid, gasoline, diesel, methanol, ketones or other flammable liquids.
Keep the air supply within the specified pressure range; operating below or above it affects function and safety.
Keep the engine off throughout, and keep away from smoking, open flames and high-temperature, flammable or explosive areas.
Oil above 60 °C may damage components. Wear gloves and safety goggles against hot oil and splashes.
If a hose or component leaks, shut off the air supply immediately and inspect the equipment.

Care

Release internal pressure and clean the equipment after each use.
Do not use the lifting rod as a handle when moving the machine; retighten adjustment screws if they loosen.
Empty the measuring cup into the tank promptly after extraction to protect the cup.
Dispose of or recycle used oil according to local regulations.