Hauptmerkmale

1. Ultrasonic Deposit Removal

   Microcomputer-controlled ultrasonic vibration removes carbon from injectors, a common cause of hard starts, unsteady idle, black smoke, weak power and slow throttle response.

2. Eight Injectors at Once

   Injectors stand in a cleaning bracket inside the bath, eight motorcycle injectors per load.

3. Timed Cleaning

   Set the run time to match how dirty the injectors are; the unit stops on its own when time is up.

4. Drain Outlet

   Used cleaning fluid drains from an outlet on the unit instead of being tipped out.

More Specifications

What’s in the Box

• 1×UNT50 main unit
• 1×Cleaning bracket
• 1×Power cord
• 1×Instruction manual
• 1×Certificate

Anwendung

1. Power upPlug the unit into a grounded socket and switch it on.
2. Connect the pulse lineAttach the pulse signal line to the injectors.
3. Load the bracketSeat the cleaning bracket on its positioning nut in the bath and put the injectors in its holes.
4. Add cleaning fluidPour in injector cleaner until the needle valves are covered by about 20 mm.
5. Set the timeUse the arrow keys to set the cleaning time.
6. CleanPress start; the unit stops automatically when the time runs out.
7. DrainLet the used fluid out through the drain port.

Full operating details: UNT50 User Manual (PDF).

Good to Know