Conductance Battery Tester for 12V Motorcycle and Car Batteries
The FXTUL BT50 reports voltage, CCA, internal resistance and remaining life for 12V lead-acid batteries, and checks the cranking and charging systems. It tests batteries in or out of the vehicle, as long as the battery holds at least 8V.
- 12V Lead-Acid
- 30–100Ah Batteries
- 4 Test Modes
- 13+ Languages
- Kelvin Clamps
Hauptmerkmale
-
Four Test Modes
Quick Test needs only the battery capacity. Standard Test reports voltage, CCA, life percentage and impedance. Cranking and charging tests check the starter draw and the charging system at idle, under load and when revving.
-
Motorcycle Battery Types
Supports common motorcycle battery types such as YTX, TTZ and GTZ.
-
All Common Lead-Acid Types
Tests flooded, AGM flat plate, AGM spiral and gel batteries.
-
Global Rating Standards
Reads results against CCA, SAE, MCA, CA, DIN, IEC, EN, BCI, GB and JIS ratings.
-
Reverse Polarity Protection
A reversed clamp connection does not damage the tester, the vehicle or the battery.
-
Saved Results
Earlier test data can be reviewed on the tester.
More Specifications
| Standard ranges | CCA / SAE / MCA / CA / DIN / IEC / EN / BCI: 20–2000; GB: 2–300Ah; JIS: 26A17–N200Z |
|---|---|
| Clamp cable | PVC, 20AWG, 4-core |
| Controls | Up/down, confirm and return buttons |
| Languages include | English, German, French, Spanish, Chinese, Japanese and Korean |
Anwendung
- Connect the clampsClamp red to the positive terminal and black to the negative terminal.
- Choose a testSelect Quick, Standard, Cranking or Charging Test from the menu.
- Enter battery detailsPick the battery type (for example motorcycle or AGM) and the rating standard.
- Read the resultThe screen shows voltage, CCA, life percentage and impedance.
Good to Know
Caution
- Testing will not start if battery voltage is below 8V.
English 
German 
Spanish 