Battery, Starting and Charging Tests With a Printed Report
The MaxiBAS BT608 tests passenger-vehicle batteries in or out of the vehicle with adaptive conductance, checks 12 V cranking and charging systems, and prints the result on its built-in thermal printer. The included VCI adds full-system diagnostics.
- CCA 100–3000 A
- Built-In Thermal Printer
- One-Touch Battery Registration
- VIN and Barcode Scan
- Full-System Diagnostics
Hauptmerkmale
-
Adaptive Conductance Testing
Evaluates cold cranking ability and reserve capacity to judge battery health, and can test low or nearly discharged batteries in the vehicle without disconnecting the terminals.
-
Cranking and Charging Tests
Runs a complete check of the starter and generator, plus electrical-system diagnostics and electric reset.
-
Quick Battery Identification
Shows battery specifications from a battery barcode scan or from automatic or manual VIN entry, with illustrated guides for battery location and testing.
-
Battery Registration
Registers a new battery with one touch after replacement.
-
Review, Print and Share
Review saved records, print reports on the built-in thermal printer, or share customized reports by email over Wi-Fi.
-
Full-System Diagnostics
Read and clear codes on all available vehicle systems with the same vehicle and year coverage as the MX808, MK808 and MK808BT.
More Specifications
| Battery rating standards | CCA, CA, SAE, EN, IEC, DIN, JIS, MCA |
|---|---|
| Camera | 8 MP |
| Input voltage | 5 V DC |
| Working current | 450 mA at 7.7 V DC |
| Operating temperature | 0 to 50 °C (32 to 122 °F) |
| Storage temperature | -10 to 60 °C (14 to 140 °F) |
What’s in the Box
- 1×BT608 main unit
- 1×MaxiVCI MV200 series
- 1×Battery clamp cable
- 2×Paper rolls
- 2×Battery side-post terminals, type T
- 2×Battery side-post terminals, type S
- 1×Power adapter
- 1×USB cable
English 
German 
Spanish 