Pulse-Drive Two Injectors at Once to Check Spray, Volume and Leaks
This 12 V/5 V injector tester drives fuel injectors with programmable pulse patterns that simulate engine operating conditions, helping you decide whether an injector is good, clean it and trace fuel delivery problems. Use it together with a fuel pressure tester.
- 12 V / 5 V Drive
- 8 Pulse Modes
- 2 Injectors at Once
- 6 Injector Adapters
Hauptmerkmale
-
Find Faulty Injectors
Detects clogged, leaking, damaged or burned-out injectors while you check injection volume and spray pattern.
-
Mode Number on the Display
The LCD shows the selected pulse mode number, so you can see and switch modes easily.
-
Same Four Patterns at Two Voltages
Single, short, long and continuous pulse patterns are available at both 12 V and 5 V drive.
-
Car and Motorcycle Injectors
Works with most car and motorcycle injectors and with any fuel pressure tester.
More Specifications
| 12 V modes | 1 single, 2 short, 3 long, 4 continuous |
|---|---|
| 5 V modes | 5 single, 6 short, 7 long, 8 continuous |
| Continuous pulse width | Approx. 7 ms |
English 
German 
Spanish 