Replacement Clamp Cable, Motherboard or Screen for AUTOOL BT Testers
Individual replacement parts for AUTOOL BT-series battery testers: a battery clamp cable, a motherboard or a screen, each chosen by host model. The tester itself is not part of the order.
- BT360 to BT960 Hosts
- Clamp Cable
- Motherboard
- Screen
Hauptmerkmale
-
Three Part Types
Choose a battery connection (clamp) cable, a motherboard or a screen as a separate variant, so only the failed part is replaced.
-
Five Host Models
Variants are offered for the BT360, BT460, BT760, BT880 and BT960, so the part is selected against the exact tester.
-
Main Test Cable
On the BT960 the main clamp cable links the tester to the battery terminals; it is separate from the yellow leakage-test cable and clamp.
How to Choose and Fit
- Read the host modelCheck the model printed on the tester: BT360, BT460, BT760, BT880 or BT960.
- Match the hardware versionChoose the variant for the same model and hardware version as the unit being repaired.
- Compare the connectorCompare the plug shape and regional power configuration of the old part with the selected one.
- Inspect on arrivalCheck the cable, connectors or board for shipping damage before fitting.
- Connect correctlyClamp onto clean battery terminals with correct polarity and stable contact; stop if the tester reports a polarity error.
Good to Know
Caution
- Do not use a cable with a bent, loose, scorched or damaged connector, and never force a connector that does not seat.
Care
- Follow the tester manual for the connection and keep strain off the tester socket.
English 
German 
Spanish 