Reset Service Lights and Diagnose Ducati Motorcycles
The FXTUL M4-DUC is dedicated to Ducati. It identifies the bike when connected, then reads codes, tests actuators and resets the service light and oil maintenance reminder on models from the 749 and 996 to the Panigale, Multistrada and XDiavel.
- Ducati Only
- Auto Model ID
- Actuator Control
- ABS Bleeding
- One-Time Purchase
Hauptmerkmale
-
Wide ECM Coverage
Works with Bosch, Melco, Magneti Marelli IAW 5AM, 5SM, 59M, 15M and 7SM, Continental M3D, M4C and M4D, and Continental Siemens M3C engine units.
-
More Than Engine and ABS
Also reaches the Bosch IMU, instrument clusters from several suppliers, BCM, suspension, traction system, immobilizer, D-AIR, Bluetooth, E-Lock, front and rear radar and LED headlamp.
-
Twin-Cylinder Actuator Tests
Control horizontal and vertical ignition coils and injectors individually, plus the fuel pump relay, electric fan, oxygen probe heater, stepper and RPM counter.
-
Service Resets
Switch off the service light, zero self-adaptive parameters, reset the TPS and throttle, and bleed the ABS.
-
Fault Analysis
Reads module information, fault codes, live data and freeze frame data recorded when a fault occurred.
M4-DUC vs Other M4 Versions
| M4-DUC | M4-BMW | M4-HD | M4-EU / M4-Asia | |
|---|---|---|---|---|
| Brand coverage | Ducati | BMW | Harley-Davidson | 10 brands each |
| Connecting cables | 5 | 4 | 5 | 10 |
| Screen | 2.8-inch | 2.8-inch | 2.8-inch | 2.8-inch |
Anwendung
- VerbindenPlug the M4-DUC into the Ducati diagnostic socket using the matching cable.
- Let it identifyThe tool recognizes the motorcycle after connection.
- Scan systemsRun Quick Test for a full fault report, or open a single unit through Control Unit.
- Service or testChoose a reset, ABS bleeding or actuator test and follow the on-screen steps.
Full menu walkthrough: FXTUL M4 user manual (PDF)
Updates & Support
Good to Know
Caution
- Supported systems and functions depend on the equipment installed on each motorcycle. Check your bike's configuration before ordering.
- The USB port runs on 5V and is meant only for updating from a computer; a fast charger above 5V can damage the tool.
English 
German 
Spanish 