Dedicated Diagnostics and Service Functions for Vespa
The OBDSTAR iScan Vespa is a portable 5-inch tablet built only for Vespa scooters, covering full-system diagnostics, service resets, module coding and live data analysis. Check the supported list before ordering.
- Vespa Dedicated
- Full Diagnostics + Coding
- Service Resets
- Wi-Fi Updates
- Remote Assistance
Hauptmerkmale
-
Complete Diagnostics
Read and clear codes, live data, actuation tests, settings and coding, with automatic scanning and VIN recognition.
-
Service and Adjustment Functions
Maintenance light reset, CO and idle speed adjustment, A/F value reset, ABS control unit setting, EOL mode, transmission memory reset and computer memory clearing.
-
Programming and Coding
Control module programming and coding, ECU settings, instrument coding and TPMS.
-
Live Data Analysis
View data as text, waveform or gauge, and record and play it back to locate sensor and component faults.
-
Built-In Repair Help
First fault guidance, help data, technical bulletins and diagnostic socket locations on the tablet.
Highlights
Special Functions
Self-learning parameter reset, TPS reset and ASR enable/disable from one menu.
Technical Bulletins
Vehicle sheets on specific error codes and the PFIS engine management system.
Diag Socket Location
Shows where the diagnostic connector sits and which cable to use.
What’s in the Box
- 1×iScan Vespa tablet
- 1×M001A main cable
- 1×M002 power cable
- 1×12 V 2 A charger
- 1×N041 OBD-6 cable
- 1×N004 Vespa-3 cable
Updates & Support
Operating instructions: iScan Series user manual (PDF).
Good to Know
Caution
- Check the supported Vespa model list before ordering.
- Connect the M002 power cable to the vehicle battery when using the N004 diagnostic connector.
English 
German 
Spanish 