Pressure-Bleed Brakes and Clutches With a Hand Pump, Gauge and Relief Valve
Fill the reservoir with fresh fluid, seal it to the master cylinder with an adapter cap and pump the handle to build pressure while the waste bottle collects old fluid at the bleeder screw. A gauge and relief valve keep the pressure in check.
- Hand-Pumped Pressure
- Gauge + Relief Valve
- 4 Master Cylinder Caps
- Waste Bottle With Chain
- Brake & Clutch Systems
Hauptmerkmale
-
Manual Pressure Pump
Push and pull the handle to generate pressure; no extra tools are needed.
-
Gauge and Relief Valve
The gauge monitors internal air pressure and the relief valve releases overpressure, helping keep air out of the braking system.
-
Four Adapter Caps
53, 55, 58 and 77 mm master cylinder adapter caps connect to the hose through an aluminum quick connector.
-
Waste Bottle With Hanging Chain
A chain and hook hang the bottle at the wheel, and its connector suits most bleeder screws.
-
Durable, Easy-Clean Body
Made from strong plastic; a wrench is included to open the filler cap without damaging it.
Highlights
Pump and Relief Valve
Build pressure with the handle; press the valve to release overpressure.
Waste Collection
Hang the bottle by its chain and hook while old fluid drains from the bleeder screw.
Master Cylinder Caps
Choose the cap that matches the reservoir and lock the quick connector onto it.
What’s in the Box
- Pump reservoir with pressure gauge, relief valve and hose
- Waste bottle with chain, hook, hose and bleeder connector
- Master cylinder adapter caps
- Filler cap wrench
Anwendung
- FillFill the tank with fresh fluid.
- VerbindenFit the matching adapter cap to the master cylinder reservoir and attach the hose.
- PressurizePush and pull the handle to generate pressure, watching the gauge.
- BleedAttach the waste bottle to the bleeder screw and collect the old fluid.
English 
German 
Spanish 