Exchange Brake Fluid With One Person and One Button
The F118 is a pulse-pressure brake fluid exchanger for the brake systems of European, American and Asian vehicles. One person connects it and presses start; the machine exchanges the fluid and collects the old fluid automatically, without the engine running.
- One-Button Start
- Pulse Exchange
- Knob Pressure Adjustment
- One-Person Operation
Hauptmerkmale
-
Pulsating Exchange
The electric pulsating system keeps bubbles out of the brake fluid, so no separate manual air removal is needed, and it recovers the old fluid while it works.
-
Pressure Monitor With Auto Stop
Set the pressure with the front knob and read it on the gauge. The pump stops automatically if pressure drops or air enters.
-
Adjustable Exchange Speed
Adjust the exchange speed to flush the brake lines more thoroughly and remove the old fluid completely.
-
Moisture-Free Air Intake
A filter on the air intake removes water from the air, keeping moisture out of the brake fluid.
-
Portable Layout
A carry handle on top, a rear base that holds the filling bottle and a hook for the filling hose; the recycling bottle fits inside the machine for carrying.
Highlights
Turn to Adjust
The knob sets the output pressure between 0.7 and 3.0 bar.
Built to Move
Handle, rear bottle base and hose hook keep everything together.
Two Bottles
A 1L filling bottle for new fluid and a recycling bottle for used fluid.
More Specifications
| Operating temperature | -10°C to +60°C |
|---|---|
| Filling bottle capacity | 1L |
F118 vs F109
| F118 | F109 | |
|---|---|---|
| Working pressure | 0.5–2.5 bar | 0.5–2.5 bar |
| Output pressure | 0.7–3.0 bar | 0.7–2.5 bar |
| Brake fluid adapters | 7 | 1 |
| Fluid level monitoring | Yes | No |
| Pulsating exchange | Yes | Yes |
| One-person operation | Yes | Yes |
What’s in the Box
- F118 main unit
- Brake fluid adapters
- Power cable
- Filling hose
- Filling bottle
- Recycling bottle
- Bedienungsanleitung
Setup and operation: F118 user manual (PDF).
Anwendung
- Fill the bottlePour new brake fluid into the filling bottle.
- Connect the bottle hosesConnect the suction hose and pressure balance hose to the filling bottle.
- Connect the filling hoseAttach the filling hose to the brake fluid cylinder with the matching adapter.
- Connect the recycling bottleAttach the recycling bottle to the brake fluid sub-cylinder.
- Select the modeChoose the working mode.
- StartPress the start button, then wait for the fluid exchange to finish.
The vehicle does not need to be started for this operation.
Good to Know
Caution
- Before first use, fill the line with brake fluid to bleed all the air out. Air entering the vehicle through the equipment line can cause failure.
- The working pressure is factory-set so the fluid reservoir does not deform during the exchange. Take care not to over-adjust when working at higher pressure, which may damage the brake master cylinder.
English 
German 
Spanish 