Guided Equal-Volume ATF Exchange Through the Cooler Lines
The AUTOOL ATF705 connects to the transmission cooler line, detects the flow direction on its own and balances fresh-fluid delivery with used-fluid recovery, guided from a 5-inch screen. It also handles circulation flushing, line cleaning, recovery, refilling and tank draining for gasoline and diesel vehicles.
- Auto Flow-Direction Detection
- Equal Exchange, Error <0.2 kg
- 5-Inch IPS Screen
- 20 L Tank
- ~20 Min Typical Exchange
Hauptmerkmale
-
Automatic Inlet/Return Detection
Connect the service hoses and start; no need to identify the flow direction by hand.
-
Balanced Exchange
Used-fluid output and new-fluid input are kept in balance, reducing the risk of overfilling or underfilling.
-
Manual Circulation Flushing
Select and control circulation from the screen to move fluid through the service route before the final exchange.
-
Visible Fluid and Pressure
New and used ATF sight glasses, fluid-level windows and a mechanical pressure gauge keep the process in view.
-
Quick-Connect Fittings
Connects to accessible transmission lines without major disassembly; the connector toolbox covers many European, American, Japanese, Korean and Chinese transmissions.
-
One-Touch Tank Draining
Empties residual fluid from the machine after the job for faster cleanup.
-
Mobile Cabinet
Push handle, one-way and swivel casters and a side hook keep hoses and connections within reach.
More Specifications
| Noise | <70 dB |
|---|---|
| Fluid level display | Real-time tank level; backlit exchange and fluid-level windows |
| Alerts | Buzzer |
| Interface languages | Chinese, English, Spanish, French, German, Russian, Portuguese, Vietnamese, Malaysian |
Model Comparison
| ATF702 | ATF705 | ATF802 | |
|---|---|---|---|
| Control | Mechanical | Electronic | Electronic |
| Screen | None | 5-inch IPS | 5-inch IPS |
| Oil pumps | Single | Single | Dual |
| Circulating flushing | Manual | Manual | Automatic |
| Equal-volume exchange | Manual | Automatic | Automatic |
| System update | No | No | USB |
What’s in the Box
- ATF705 main unit
- Connector toolbox with specialized connectors and service accessories
- Bedienungsanleitung
Anwendung
- Prepare power and ATFConfirm the 110 V or 220 V version and prepare the ATF specified by the vehicle manufacturer.
- Lift and secure the vehicleRaise the drive wheels at least 20 cm off the ground, apply the parking brake and chock the non-drive wheels.
- Connect the fluid linesDisconnect the accessible line between transmission and radiator and connect the hoses with the correct connectors.
- Check for leaksStart the engine as required and continue only when every connection is secure and dry.
- Select the functionChoose smart exchange, equal-volume exchange, circulation flushing, line cleaning, recovery, refilling or draining.
- Shift through the gearsDuring circulation flushing, shift as directed and hold each gear for about one minute when the procedure calls for it.
Exchange, flow detection, connectors and troubleshooting: ATF705 user manual (PDF)
Good to Know
Caution
- Match the unit label to your power supply before connecting; order the correct voltage version for your region.
- Overfilling or underfilling can damage an automatic transmission. Use only the ATF the vehicle manufacturer specifies and do not mix fluids.
- Run drive-wheel procedures only with the vehicle safely lifted, and procedures at or above 60 km/h only under controlled workshop conditions.
- Confirm connector fitment for your vehicle before ordering if unsure.
Care
- Stop if a hose leaks or a connector loosens.
- After the exchange, restore the circuit, set the final level by the vehicle procedure and inspect for leaks.
- Run circulation flushing longer than 20 minutes when the vehicle procedure calls for extended flushing.
English 
German 
Spanish 