Vacuum-Fill Coolant Without Trapped Air
This AUTOOL kit draws a vacuum on the cooling system, shows it on a gauge to reveal leaks, then pulls fresh coolant in without time-consuming air bleeding. It runs from an air compressor, which is not included.
- Vacuum Fill + Leak Check
- 5 Adapters
- Transparent Filling Hose
- Dual-Scale Gauge
- Storage Case
Hauptmerkmale
-
Vacuum Filling
Creating a vacuum and drawing coolant into the radiator shortens coolant replacement and avoids poor circulation caused by air entering the system.
-
Vacuum Pressure Testing
The gauge shows real-time vacuum during the process, so cooling-system leaks can be spotted quickly.
-
Fits Many Radiator Necks
Four sized adapters plus a universal tapered rubber adapter mount on the manifold body to seal the system on cars, SUVs, vans and trucks.
-
Sealed Metal Body
Aluminum and brass tee fitting, manifold body and control valve resist corrosion and help avoid air leakage.
-
Protected Gauge
Marked in bar and cmHg with a protective rubber boot against knocks and drops.
-
See-Through Hose with Filter
The transparent filling hose shows coolant flow, and its suction nozzle has a filter to keep out debris.
What’s in the Box
- 1×Coolant vacuum refill tool with gauge
- 1×5 ft see-through hose
- 1×Universal tapered adapter
- 4×Adapters of different sizes
- 1×3-way T-connector with air plug
- 1×Storage case
Good to Know
Caution
- An air compressor is required and not included.
- Do not replace coolant while the system is hot. The cooling system may spray hot coolant under pressure when opened.
- Check that your radiator opening size matches the supplied adapters before ordering.
Care
- Wear goggles and gloves during operation.
- Store the tools in the case inlay after use.
English 
German 
Spanish 