Remove a Mercedes-Benz Wheel Lock When the Key Is Lost or Worn
A 12-piece set of CR-Mo steel sockets for removing and refitting anti-theft wheel nuts on supported Mercedes-Benz models such as the C300 and E320. Not every lock pattern is covered, so match the nut shape and markings before ordering.
- 12 Pieces
- CR-Mo Steel
- Remove & Install
- Mercedes-Benz Wheel Locks
Hauptmerkmale
-
Pattern Sockets for Benz Locks
Covers lock patterns used on A, B, C, E, SL and M-Class, GLK, CLS and SLK models.
-
Chrome-Molybdenum Steel
CR-Mo steel gives the sockets high hardness and resistance to wear and rust.
-
Replaceable Sockets
Each lock pattern has its own socket, so you swap sockets to suit the wheel instead of buying a new tool.
-
Two-Way Use
The same socket that loosens the lock nut can tighten it back on, or you can fit a new lock.
Anwendung
- Secure the vehiclePark on flat ground and apply the parking brake.
- Find the lock nutLocate the anti-theft nut on the wheel and note its pattern.
- Pick the socketChoose the socket from the set that matches the pattern.
- Seat the socketFit it fully and squarely onto the lock nut.
- Loosen with steady forceTurn the wrench with even pressure rather than impacts.
- Remove the nutOnce it breaks free, unscrew the lock nut completely.
- RefitInstall a new lock nut or refit the wheel as needed.
Good to Know
Caution
- Not all models or lock patterns are supported. Compare the shape and marks of your lock nut and key before ordering.
- Too much torque can damage the socket. Keep the wrench within the torque limit listed for this set.
- Use the set only on your own vehicle or with the owner’s permission.
Care
- Wipe the sockets with a rag or mild cleaner after use.
English 
German 
Spanish 