Inject Power, Test Grounds and Locate Shorts on 12 V and 24 V Systems
The PowerScan PS100 is powered by the vehicle battery and combines a meter, test light, power and ground injection, short locating and continuity testing in one probe, with a 20 ft extension cable to reach along the vehicle.
- 12 V / 24 V Systems
- Power and Ground Injection
- Short Locating
- 20 ft Extension Cable
- Circuit-Breaker Protected
Hauptmerkmale
-
Power Injection
Flip the power switch for an instant hot or ground lead to power components such as cooling fans and relays.
-
Component Activation in Hand
Uses the hot lead and the ground lead together to activate components on or off the vehicle.
-
Short and Bad-Ground Tracing
Checks for bad ground contacts and helps you follow and locate shorts without wasting fuses.
-
Polarity and Continuity Checks
Identifies positive, negative and open circuits, and checks continuity of switches, relays and diodes.
-
Meter Readings at the Probe
The built-in AVOmeter shows DC and AC voltage, resistance and diode readings, and senses MIN/MAX voltage.
-
Work in Dark Areas
A built-in flashlight lights the test point, and audio tones allow no-look menu scrolling once you know the tone assignments.
What’s in the Box
- 1×PowerScan PS100
- 1×Rugged blow-molded case
- 1×20 ft extension cable
- 1×Probe tip
- 1×Battery hookup clips
- 1×Cigarette lighter adapter
- 1×User’s manual
English 
German 
Spanish 