Keep Service Equipment and Tools Together Beside the Vehicle
The T21 carries a service unit on its non-slip top shelf, small tools in the drawer and heavy items on the lower shelf, then rolls between bays and locks in place at the work position. Assembly is required.
- Up to 100 kg Load
- Top Shelf + Drawer + Lower Shelf
- 4-inch Locking Casters
- Side Hooks + Push Handle
- 580 × 780 × 1000 mm
Key Features
-
Non-Slip Equipment Shelf
The thickened top shelf holds a service unit such as a brake-fluid exchanger; match its footprint and weight and keep controls, hoses and cables accessible.
-
Drawer for Small Tools
A large drawer on quiet sliding rails keeps small tools and accessories organized during the job.
-
Lower Shelf for Heavy Items
The bottom shelf takes heavy tools or car batteries and keeps the load low.
-
Hooks and Push Handle
Side hooks keep frequently used tools within reach; the handle helps push the cart between work areas.
-
Cold-Rolled Steel Body
A rust- and corrosion-resistant surface suits daily workshop storage and maintenance use.
-
Swivel Casters With Locks
360° swivel casters move the loaded cart, and the locking system keeps it from rolling while you work.
More Specifications
| Cart size | 580 × 780 × 1000 mm |
|---|---|
| Assembly | Required; frame, shelves, drawer, hooks, handle and casters fit with the supplied hardware |
What’s in the Box
- Top and lower shelves, drawer, side frame parts, hooks and handles
- Four caster assemblies with mounting hardware
- Screws, fasteners and connecting pieces
- T21 assembly and care manual
How to Use
- Match the equipmentConfirm the footprint and weight of the equipment and tools you plan to carry, with heavy items planned for the lower shelf.
- Assemble the cartFit the frame, shelves, drawer, hooks, handle and casters with the supplied hardware, following the T21 manual.
- Inspect before loadingTighten fasteners, check smooth drawer travel, and confirm each caster turns and locks.
- Load by work sequenceMain service unit on the top shelf, small tools in the drawer, frequently used items on the hooks, heavy items low.
- Move, then lockSecure loose items, roll over a clear level route, and lock the casters before operating equipment or opening the drawer.
Assembly, storage setup and caster locking: T21 user manual (PDF).
Good to Know
Caution
- Do not overload the cart; keep the complete load, including equipment on the top shelf, within the rated capacity.
- Lock the casters before operating equipment on the cart or opening the drawer.
Care
- Check fastened and connected parts regularly and tighten anything loose.
- Treat parts exposed to chemicals against corrosion, for example by rust removal and painting.
- Avoid rubbing the cart against rough surfaces, especially the sheet-metal panels.
- Store in a dry, ventilated place, away from high temperature and humidity.
English 
German 
Spanish 