A Fixed Home Charging Point You Can Schedule and Lock
The C701 wall-mounted station delivers up to 7 kW AC through an 8 m Type 2 cable, with a 4.3-inch touchscreen, scheduled charging and card, password or plug-and-charge access. It needs a correctly rated, grounded 220 V circuit installed by a qualified electrician.
- 7 kW / 32 A
- 8 m Copper Cable
- 4.3-inch Touchscreen
- Scheduled Charging
- 3 Access Modes
Key Features
-
Current Matched to Your Circuit
Select a charging current from the touchscreen that suits the installed circuit and the vehicle. When the JP2 jumper sets the current, screen selection is unavailable.
-
Live Charging Readout
The touchscreen shows charging progress, current, voltage, temperature, power, time and status.
-
App, Wi-Fi and Bluetooth
On matching C701 hardware, view charging status and configure options remotely; screen and local access controls stay available at the unit.
-
Three Ways to Start
Card unlock for shared use, password for added security, and plug-and-charge for quick daily sessions.
-
Delayed Start
Schedule a session to fall inside your chosen tariff or load window; any saving depends on your electricity plan.
-
Heavy-Duty Cable
The 8 m (26 ft) oxygen-free copper cable has a thickened outer sheath for flexible reach in wall- or post-mounted installations.
-
Charging Protection
Provisions include over/under voltage, short circuit, leakage, grounding, overcurrent, over temperature, moisture, reverse connection, lightning, emergency stop and flame retardance.
C701 vs C350
| C701 | C350 | |
|---|---|---|
| Format | Wall-mounted station | Portable |
| Rated power | 7 kW | 3.3 kW |
| Current settings | 10 / 14 / 16 / 25 / 32 A | 8 / 10 / 12 / 14 / 16 A |
| Cable length | 8 m | 5 m |
| Ingress rating | IP65 control box, IP54 connector when coupled | IP65 |
| Controls | Touchscreen, card/password access, app connectivity | Delayed-start timer |
What’s in the Box
- C701 charging station with attached charging cable
- Wall mounting bracket
- Screws and expansion tubes
- Access cards
- User manual
How to Use
- Confirm the installationHave a qualified person check supply voltage, circuit capacity, grounding, upstream protection, cable route, location and vehicle connector.
- Mount and commissionFit the backplate and station per the manual, connect the dedicated supply and complete electrical checks before energizing.
- Choose access and currentPick card, password or plug-and-charge, and set a current the circuit and vehicle allow.
- Connect and monitorInsert the connector fully, start the session and follow it on the display or app.
- Finish and inspectEnd the session, stow the connector and regularly check the cable, connector, mounting, emergency stop and fault status.
Installation, circuit matching and troubleshooting: C701 user manual (PDF).
Good to Know
Caution
- Installation should be done by a professional electrician to local electrical and building codes; the home circuit may need upgrading to carry the load.
- Order the vehicle connector and electrical version for your vehicle and region; match the full connector standard, not pin count alone.
- Protection functions only work as intended on a correctly rated, grounded circuit with the required upstream protection.
Care
- Mount near the parking space and away from flammable objects.
FAQ
Which vehicles can it charge?
EVs with an IEC 62196-2 (Type 2) inlet, for example models from Tesla, Volkswagen, Volvo, Skoda, Audi, MG, Dacia, Fiat, Ford, BMW and Mercedes-Benz. Confirm the inlet and regional voltage version for your vehicle.
Does charging depend only on the C701 setting?
No. Actual output is also limited by the installation and the vehicle’s onboard charger.
Is the C701 waterproof?
The control box is rated IP65 and the connector IP54 when coupled. Proper mounting, cable storage, drainage, inspection and maintenance are still required.
English 
German 
Spanish 