Three Cables to Reach the Tesla Diagnostic Ports Your Autel Scanner Needs
TLAN001, TCAN001 and TCAN002 each connect a Tesla-capable Autel scanner to a different Tesla port, covering Model S, X, 3 and Y depending on the vehicle and build date.
- 3 Cables
- Model S / X / 3 / Y
- Factory Mode via X861
- For Tesla-Capable Autel Hosts
Key Features
-
TLAN001 for Factory Mode
Connects to the X861 port to activate factory mode on Teslas built after September 2015; the port sits behind the dashboard.
-
TLAN001 for Earlier Cars
Also connects to the X863 port, on the left side of the instrument panel, on Teslas built before September 2015.
-
TCAN001 for Model Y and Heat-Pump Model 3
Works on Model Y and on Model 3 vehicles from 2021 with a heat pump.
-
TCAN002 for the X437 Port
Connects to the X437 port on Teslas built before September 2015; together with TCAN001 it covers Model S and Model X of all years.
What’s in the Box
- TLAN001 cable
- TCAN001 cable
- TCAN002 cable
Good to Know
Caution
- Connecting to the X861 port requires removing the dashboard.
- The cables work only with an Autel scanner that supports Tesla diagnostics.
English 
German 
Spanish