Diagnose 10 Motorcycle Brands Including Piaggio, Aprilia and Triumph
This FXTUL M4 version covers Kawasaki, Yamaha, Honda, Vespa, Suzuki, Piaggio, KTM, Aprilia, Triumph and Royal Enfield. It supports OBD2 and EURO5 protocols and handles codes, live data, service light reset, ECU reset and ABS bleeding.
- 10 Brands
- OBD2 & EURO5
- ABS Bleeding
- 13 Languages
- 2.8-inch Screen
Key Features
-
Quick Test for Every System
Scans all systems of the selected model, reports which are fitted and which hold codes, and builds a fault report; codes can be cleared across all systems at once.
-
Service Light and ECU Reset
Resets the service reminder and the ECU where the model supports it.
-
ABS Bleeding
Runs the ABS venting routine after brake work on supported models.
-
Data Graphs and Freeze Frames
Live data can be shown as a waveform, and freeze frame data shows conditions at the moment a fault was stored.
-
Actuator and Service Tests
Activate components and run idle speed regulation or throttle position learning.
-
Voltage and Unit Options
Reads battery voltage live at the socket and switches between metric and imperial units.
M4-EU vs M4-Asia
| M4-EU (this version) | M4-Asia | |
|---|---|---|
| Shared brands | Honda, Yamaha, Kawasaki, Suzuki, Vespa, KTM | Honda, Yamaha, Kawasaki, Suzuki, Vespa, KTM |
| Brands unique to the version | Piaggio, Aprilia, Triumph, Royal Enfield | SYM, KYMCO, PGO, Benelli |
| Connecting cables | 10 | 10 |
How to Use
- ConnectPlug the M4 into the motorcycle's diagnostic socket with the matching brand cable.
- Choose brandSelect Diagnosis, then the motorcycle brand.
- Match the modelUse Model Selection, or System Selection when the model name is not listed.
- Run the scanStart Quick Test or open one system through Control Unit, then read, clear or test as needed.
Full menu walkthrough: FXTUL M4 user manual (PDF)
Updates & Support
If a motorcycle or function is not supported, update to the latest software and reconnect.
Good to Know
Caution
- Service light reset and ECU reset depend on the model's compatibility.
- The USB port runs on 5V and is meant only for updating from a computer; a fast charger above 5V can damage the tool.
Care
- Follow the on-screen instructions once the M4 is connected to the motorcycle.
English 
German 
Spanish 