![[US Ship] OBDSTAR ECM-001 Cable for X300 Classic G3/ Keymaster G3/ DC706 Read IMMO Data for DCM6.2V MED17.5.25, MED17.5.21, ME17.5.22, EDC17C64](https://autoboss.com/wp-content/uploads/obdstar-catalog/media/6c645d2eb191fcf7519d6cbb-transparent.png)
![[US Ship] OBDSTAR ECM-001 Cable for X300 Classic G3/ Keymaster G3/ DC706 Read IMMO Data for DCM6.2V MED17.5.25, MED17.5.21, ME17.5.22, EDC17C64](https://autoboss.com/wp-content/uploads/obdstar-catalog/media/8877eedb6f9f2ef916d4d019.jpg)
![[US Ship] OBDSTAR ECM-001 Cable for X300 Classic G3/ Keymaster G3/ DC706 Read IMMO Data for DCM6.2V MED17.5.25, MED17.5.21, ME17.5.22, EDC17C64](https://autoboss.com/wp-content/uploads/obdstar-catalog/media/dae279778da60117e1d7824c.jpg)
![[US Ship] OBDSTAR ECM-001 Cable for X300 Classic G3/ Keymaster G3/ DC706 Read IMMO Data for DCM6.2V MED17.5.25, MED17.5.21, ME17.5.22, EDC17C64](https://autoboss.com/wp-content/uploads/obdstar-catalog/media/b0e075d0bd5328ae5fcf173a.jpg)
![[US Ship] OBDSTAR ECM-001 Cable for X300 Classic G3/ Keymaster G3/ DC706 Read IMMO Data for DCM6.2V MED17.5.25, MED17.5.21, ME17.5.22, EDC17C64](https://autoboss.com/wp-content/uploads/obdstar-catalog/media/1eb0d138e595c3ee9be83411.jpg)
![[US Ship] OBDSTAR ECM-001 Cable for X300 Classic G3/ Keymaster G3/ DC706 Read IMMO Data for DCM6.2V MED17.5.25, MED17.5.21, ME17.5.22, EDC17C64](https://autoboss.com/wp-content/uploads/obdstar-catalog/media/4afc661678c1743e462e45da.jpg)
Solder-Free Bench Connection for ECU IMMO Data Reads
The ECM-001 is a 5-in-1 cable that plugs the supported engine ECUs into an OBDSTAR bench setup, so immobilizer data can be read without soldering or wiring each pin by hand.
- 5-in-1 Cable
- Solder-Free
- Bench Mode via MP001
- IMMO Data Read
Key Features
-
One Cable, Five ECU Types
A single 5-in-1 cable covers all five supported ECU types.
-
Simpler Than the Wiring Diagram
Replaces point-by-point bench wiring with a direct plug-in connection to the MP001.
-
Full Data Read
On the X300 Classic G3, the read pulls both the EEPROM and flash data from the ECU, then displays and saves the CS code.
What’s in the Box
- 1×ECM-001 cable
How to Use
- Choose the functionIn the immobilizer menu for the vehicle, select Read ECM Immo data.
- Select the ECUPick the ECU type, then choose bench mode with the MP001.
- ConnectLink the ECU to the MP001 and host as shown on screen, using the ECM-001’s matching plug.
- ReadRead the ECU info, then run Read IMMO Data under Advanced Functions.
Menu names follow OBDSTAR’s X300 Classic G3 procedure for a VW MED17.5.25 ECU.
Good to Know
Caution
- The bench procedure runs through the OBDSTAR MP001 programmer, which is not included.
English 
German 
Spanish ![[US Ship] OBDSTAR ECM-001 Cable for X300 Classic G3/ Keymaster G3/ DC706 Read IMMO Data for DCM6.2V MED17.5.25, MED17.5.21, ME17.5.22, EDC17C64](https://autoboss.com/wp-content/uploads/obdstar-catalog/media/6c645d2eb191fcf7519d6cbb-transparent-100x100.png "6c645d2eb191fcf7519d6cbb.jpg")