Activate, Read, Relearn and Program TPMS Sensors From One Handheld
The MaxiTPMS TS508WF activates all known OE sensors, reads sensor status, checks TPMS system health, programs Autel MX-Sensors and performs relearns, with software updates over Wi-Fi or USB.
- Activate / Read / Relearn
- MX-Sensor Programming
- Quick and Advanced Modes
- Wi-Fi Updates
- Key Fob Signal Test
Key Features
-
TPMS Status Screen
Read sensor IDs stored in the ECU, check that sensor and ECU IDs match, read and erase DTCs, and view DTC descriptions.
-
Sensor Data at a Glance
Displays sensor ID, pressure in psi and, on supported sensors, battery life.
-
Guided Relearns
Shows vehicle-specific relearn procedures and performs OBDII relearns.
-
Two MX-Sensor Programming Options
Copy by OBD writes the ID saved in the ECU; Auto Create makes new IDs when the original cannot be obtained.
-
Tire Type and Pressure Selection
When all TPMS faults are cleared and the tires are at placard pressure but the TPMS light stays on, select the tire type and set the correct pressure value; placard reset works on supported vehicles.
-
Update Without a Computer
Update the software directly over Wi-Fi, or by USB.
More Specifications
| Battery type | Li-polymer |
|---|---|
| Operating temperature | 0°C to 50°C (32°F to 122°F) |
| Storage temperature | -20°C to 70°C (-4°F to 158°F) |
What’s in the Box
- 1×MaxiTPMS TS508WF
- 1×OBD II cable
- 1×USB cable
- 1×AC adapter
- 1×Packing list
- 1×Carrying case
Good to Know
Caution
- Sensor programming works with Autel MX-Sensors only.
English 
German 
Spanish 