A Palm-Length OBD2 Extension That Takes Plugging Wear Off the Vehicle Port
At about 14–15 cm, this yellow 16-pin male-to-female cable adds just enough reach at a tight port for Launch X431-type tools without leaving slack in the footwell. It is a passive extension: functions still come from the vehicle and the connected tool.
- 14–15 cm
- 16-Pin Male to Female
- Yellow TPE Jacket
- Single Cable
Key Features
-
Short on Purpose
The compact length gives working room at the socket without a long, bulky run around the dashboard or pedals.
-
Sacrificial Connection Point
Repeated tool connections land on the cable instead of the original vehicle socket and the scan-tool plug.
-
Grip and Strain Relief
Molded connector bodies have a textured grip area and a strain-relief collar for easier plugging and positioning.
-
TPE Jacket, Copper Core
A flexible, insulated TPE outer jacket covers copper-core wiring for stable diagnostic communication.
What’s in the Box
- 1×OBD2 16-pin male-to-female extension cable, 14–15 cm, in a retail bag
How to Use
- Check the portConfirm the vehicle has a standard 16-pin OBD2 socket and inspect it for damage.
- Check the toolConfirm your scanner, software and protocol support the job; the cable does not change them.
- Plug in the male endAlign it with the vehicle socket and push in straight without forcing.
- Attach the toolConnect the scanner or diagnostic cable to the female end.
- Test the linkRun a read-only connection check first; if communication changes, compare with a direct connection.
Good to Know
Caution
- Recessed or covered ports, special connectors and awkward access angles may not leave room for the plug. Check clearance before ordering.
- Do not draw power for unknown or high-current devices through the diagnostic port.
Care
- Unplug by holding the molded connector body, not the cable.
- If a tool drops out, resets or overheats, disconnect and return to a known direct connection.
FAQ
Will it work with a Launch X431?
It is intended for Launch X431-style tools that use a standard OBDII 16-pin connector. Check the connector shape, port direction and dashboard clearance before ordering.
How exact is the length?
The nominal length is about 14–15 cm. If clearance is tight, ask for the current measured length.
What if the connector does not fit?
Do not force it. Check that the port is standard 16-pin, that the plug faces the right way and that trim is not blocking it.
English 
German 
Spanish 