Key Features

1. Digital Inflation Gauge

   Read tire pressure on the machine-side gauge while seating and inflating the tire.

2. Composite Housing

   The reinforced housing adds strength and reduces vibration of the working head.

3. Pull-Out Foot Valve Assembly

   The pedal valve block slides out for easier maintenance and servicing.

4. Protected Alloy Steel Jaws

   Jaws with quenched tips and protective sleeves hold the rim firmly while protecting its surface.

5. Stainless Steel Mounting Head

   Fitted with anti-scratch washers to reduce rim damage when demounting and mounting.

6. Large Bidirectional Cylinder

   A large cylinder with dual exhaust gives fast return movements and stronger bead breaking.

7. Bead Clamps Included

   Comes standard with tire bead clamps.

How to Use

1. Confirm the wheelCheck rim diameter and width, tire outside diameter, profile, condition and wheel weight against the machine range.
2. Deflate fullyRemove the valve core and confirm zero pressure before bead breaking or demounting.
3. Break the beadLubricate the bead, keep the bead-breaker shoe clear of the rim and keep hands outside the moving zone.
4. Center and clampCenter the rim on the turntable and confirm all jaws engage evenly.
5. Set arm and headPosition the swing arm and mounting head with the required rim clearance, protectors and tire lubricant.
6. Demount or mountKeep the bead in the drop center while the turntable rotates.
7. Seat and inflateFollow the tire and rim inflation procedure, stay out of the trajectory zone and never exceed the seating or service pressure.
8. Inspect the assemblyCheck bead seating, valve, rim contact and tire condition before removing the wheel.

Good to Know